Alpine CDE-135BT - Using the Front aux Input Terminal; Setup; Setting

20-EN
Using the Front AUX Input Terminal
Connect a portable music player, etc. by simply connecting it to the
input on the front panel. An optional adapter cable is required (standard
RCA to 3.5ø mini-phono plug or 3.5ø to 3.5ø mini-phono plug).
Press SOURCE, and select the AUXILIARY mode to
listen to the portable device.
Notes
• This function is available only when AUX SETUP is set to ON. For
details, refer to “Setting the AUX SETUP Mode” on page 21.
• Do not connect a Flash Memory Device and an AUX Input Terminal
connector at the same time.
Setting
You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, GENERAL Setting, DISPLAY Setting,
etc., can be modified.
1 Press and hold AUDIOSETUP for at least 2 seconds to
activate the SETUP mode.
2 Turn the Rotary encoder to select the desired item, and
then press ENTER.
BLUETOOTH
*1
 GENERAL  AUDIO
*2
 DISPLAY  TUNER 
iPod & USB
(e.g. Select GENERAL)
GENERAL:
PLAY MODE  AUX SETUP  AUX NAME
*3
 AUX GAIN
*3

AUX MIX
*3
 CYRILLIC  POWER IC  DEMO
DISPLAY:
ILLUMINATI  SCROLLTYPE  TEXT SCR
TUNER:
RDS REG
*4
 PI SEEK
*5
 ALARM
*6
 FM-LEVEL
iPod & USB:
USB SEARCH  USB SKIP  VTUNER  VTUNER VL
*7
*1 Refer to “BLUETOOTH SETUP” on page 24.
*2 Refer to “Sound Setting” on page 17.
*3 Displayed only when AUX SETUP is set to ON.
*4 Refer to “Receiving RDS Regional (Local) Stations” on page 12.
*5 Refer to “PI SEEK Setting” on page 12.
*6 Refer to “Setting PTY31 (Emergency Broadcast) reception” on
page 12.
*7 Displayed only when VTUNER is set to ON.
3 Select an Item with the Rotary encoder, and then press
ENTER.
(e.g. Select POWER IC)
4 Turn the Rotary encoder to change the setting, and then
press ENTER.
(e.g. Select POWER IC ON or POWER IC OFF.)
Portable player, etc.
Main unit
or
Optional adapter cable (RCA pin
plugs [red, white] 3.5ø miniplugs)
or (3.5ø miniplugs).
SETUP
Use steps 1 to 5 to select one of the SETUP modes to modify.
See the applicable section below for details about the
selected SETUP item.
SOURCE/

/TA
AUDIO/SETUP
Rotary encoder