Alpine CDE-135BT User Manual

21-EN
5 Press and hold AUDIOSETUP for at least 2 seconds to
return to normal mode.
Notes
•Press  to return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
GENERAL is selected on the setup main menu in step 2.
Playing MP3/WMA/AAC Data (PLAY MODE)
This unit can play back CDs containing both CD and MP3/WMA/AAC
data (created in Enhanced CD (CD Extra) format). However, in some
situations, playback of an enhanced CD may be difficult. In this case,
you can choose to play back the CD data session only. When a disc
contains both CD and MP3/WMA/AAC data, playback starts from the
CD data portion of the disc.
 Setting item: PLAY MODE
Setting contents:
CD-DA (Initial setting) / CDDA/MP3
CD-DA:
Only the CD data in Session 1 can be played back.
CDDA/MP3:
CD data, MP3/WMA/AAC files in mixed mode, and multi-session
discs can be played back.
Note
• Perform this setting before inserting a disc. If a disc has already been
inserted, remove it first.
Setting the AUX SETUP Mode
You can input the audio of an external device, (such as a Portable audio
player) to the AUX connector of this unit.
 Setting item: AUX SETUP
Setting contents:
ON (Initial setting) / OFF
ON
*
:
Set to ON when a portable device is connected. If SOURCE is
pressed and AUX is selected, the sound of the portable device is
input to the unit.
* You can change the AUX NAME display when AUX SETUP is
set to ON. Press ENTER when AUX SETUP is set to ON,
and select AUX NAME by turning the Rotary encoder, then
press ENTER. After that, turn the Rotary encoder to
select the desired AUX NAME.
Note
• When the PORTABLE is set, PMD is displayed on the unit.
OFF:
When set to OFF, AUX source cannot be selected.
Setting the AUX Level (AUX GAIN)
After setting to ON in “Setting the AUX SETUP Mode”, this setting can
be carried out.
 Setting item: AUX GAIN
Setting contents:
LOW (Initial setting) / HIGH
LOW:
Decreases the external input audio level.
HIGH:
Increases the external input audio level.
Setting the AUX MIX
With an external audio device connected to the front AUX terminal of
CDE-135BT, the voice from external device will be mixed with the radio
or CD, etc. play.
 Setting item: AUX MIX
Setting contents:
OFF (Initial setting) / ON
Notes
• Noise may be more noticeable when this function is not used. In this
case, the OFF setting is recommended.
• This setting is effective when AUX SETUP is ON.
Setting the Language (CYRILLIC)
Set the language to be displayed on the unit.
 Setting item: CYRILLIC
Setting contents:
OFF (Initial setting) / ON
OFF:
English, Latin character
ON:
Russian, English
Note
• Refer to the table below for the Russian display on this unit.
Connecting to an External Amplifier (POWER IC)
When an external amplifier is connected, sound quality can be
improved by reducing the current draw of the built-in amplifier.
 Setting item: POWER IC
Setting contents:
ON (Initial setting) / OFF
ON:
The speakers are driven by the built-in amplifier.
General Setting
D
D:
C:
CDCDCDC

Alpine CDE-135BT Specifications

General

Brand	Alpine
Model	CDE-135BT
Category	Car Receiver
Language	English