Alpine CDE-164EBT - Removal; Mounting the Microphone

49-EN
1 Remove the detachable front panel.
2 Insert the bracket keys into the unit, along the guides on
either side. The unit can now be removed from the
mounting sleeve.
 CDE-W265EBT
 CDE-164EBT
3 Pull the unit out, keeping it unlocked as you do so.
JAPANESE CAR
 CDE-W265EBT
 CDE-164EBT
Mounting the Microphone
For the sake of safety, mount the microphone in the following location.
• In a stable and secure location.
• In a location that does not inhibit safely driving the vehicle.
• Mount the microphone in a location where the driver’s voice can
easily be picked up.
Choose a location for the microphone that can easily pick up the drivers
voice. Requiring the driver to move towards the microphone for
audibility causes a distraction that could be dangerous.
Removal
Bracket keys
(Included)
This unit
Bracket keys
(Included)
This unit
Front Frame
Screw (M5 × 8)
(Included)
Mounting
Bracket
Front Frame
Screw (M5 × 8)
(Included)
This unit
Mounting
Bracket
Cable clamp
(Sold separately)
Microphone
00ALPINE.book Page 49 Thursday, October 23, 2014 4:15 PM