Alpine CDE-175R - System Setup and Preferences

27-EN
Setting
You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, General Setting, Display Setting, etc. can
be modified.
1 Press and hold AUDIO/SETUP for at least 2 seconds to
activate the SETUP mode.
2 Turn the Rotary encoder to select the desired item, and
then press ENTER.
Audio
*1
 General  Display  Tuner  iPod&USB 
Application  Bluetooth
*2
 Audio
3 Turn the Rotary encoder to select a setting item, and then
press ENTER.
General:
Clock Mode  Auto Clock  Clock Adjust
*3
 Calendar  FAV
Setup
*4
 Language Setup  AUX IN  AUX Name
*5
 Play
Mode
*6
 Beep  Demo  Steering  Clock Mode
Display:
Illumination  Dimmer  Dimmer Level  Scroll Type  Text
Scroll  Opening MSG  Illumination
Tuner:
AF
*7
 News
*8
 Alert PTY31
*9
 RDS Regional
*10

PI Seek
*11
 FM Tuner Setup  AF
iPod&USB:
USB Skip  iPod List Setup  USB Skip
Application:
Alpine APP  TTS Volume  Alpine APP
*1 Refer to “Audio Setup” on page 18.
*2 Refer to “BLUETOOTH SETUP” on page 32. Only for
CDE-178BT/iDE-178BT.
*3 Refer to “Setting the Time and Calendar” on page 10.
*4 Only for CDE-175R.
*5 Displayed only when AUX IN is ON.
*6 Only for CDE-178BT/CDE-175R.
*7 Refer to “Turning AF (Alternative Frequencies) ON/OFF” on
page 12.
*8 Refer to “Priority News” on page 12.
*9 Refer to “Setting PTY31 (Emergency Broadcast) reception” on
page 12.
*10 Refer to “Receiving RDS Regional (Local) Stations” on page 13.
*11 Refer to “PI SEEK Setting” on page 13.
4 Turn the Rotary encoder to change the setting, and then
press ENTER.
5 Press and hold AUDIO/SETUP for at least 2 seconds to
return to normal mode.
Notes
•Pressing r returns to the previous SETUP mode.
• If no operation is performed for 60 seconds, SETUP is cancelled.
General is selected on the setup main menu in step 2.
Setting the Clock Display (Clock Mode)
You can select the clock display type, 12-hour or 24-hour, depending on
your preference.
 Setting item: Clock Mode
Setting contents:
00:00 (24-hour) (Initial setting) / AM (Before noon) 12:00
(12-hour)
Setting the Time to automatically be adjusted
When ON is selected, the clock is adjusted automatically based on the
time data sent from the RDS broadcast.
 Setting item: Auto Clock
Setting contents:
OFF / ON (Initial setting)
OFF:
To adjust it manually.
ON:
Adjust the clock automatically based on the time data.
Setting of Calendar Display Pattern Switching
(Calendar)
You can switch the calendar display pattern to be shown when the time
is displayed.
 Setting item: Calendar
Setting contents:
mm/dd/yyyy / dd/mm/yyyy (Initial setting) / yyyy/mm/dd
yyyy :
Shows the year
mm :
Shows the month
dd :
Shows the day
ex. dd/mm/yyyy  01/01/2013
SETUP
Use steps 1 to 5 to select one of the SETUP modes to modify.
See the applicable section below for details about the
selected SETUP item.

1
2

SOURCE
BAND
/ENTER

AUDIO/SETUP
FAV(CDE-175R Only)
Rotary encoder
General Setting