EasyManua.ls Logo

Alpine CDE-175R - (FAV Setup) (CDE-175 R Only); Demonstration; Playing MP3;WMA;AAC Data (Play Mode) (CDE-178 BT;CDE-175 R Only); Setting the aux NAME Mode

Alpine CDE-175R
53 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28-EN
Setting your favourite source to the FAV button
(FAV Setup) (CDE-175R only)
You can select one source as your favourite source. Once this is set, you
can switch to favourite source directly by pressing FAV.
Setting item: FAV Setup
Setting contents:
OFF (Initial setting) / FM1 / FM2 / FM3 / MW / LW / Disc /
USB/iPod / vTuner / AUX
Notes
Depending on the setting, some item may not selectable.
If you do not want to use this function, select “OFF”.
This setting can also be activated by pressing and holding FAV for at
least 2 seconds. For details, refer to “Setting your favourite source to the
FAV button (FAV Setup) (CDE-175R only)” on page 25.
Setting the Menu Language
Set the language to be displayed on the unit. Six types of font can be
selected.
Setting item: Language Setup
Setting contents:
English (Initial setting) / Russian / Deutsch / Francais /
Espanol / Italiano / Nederlands
Note
The Owner’s Manual only describes the setup menu display when
English is set.
Setting the AUX SETUP mode
You can input the audio of an external device, (such as a Portable audio
player) to the AUX connector of this unit.
Setting item: AUX IN
Setting contents:
OFF / ON (Initial setting)
OFF:
When set to OFF, AUX source cannot be selected.
ON:
Set to ON when a portable device is connected. If VSOURCE is
pressed and AUX is selected, the sound of the portable device is
input to the unit.
Setting the AUX NAME mode
You can change the AUX NAME display in the SETUP mode.
Setting item: AUX Name
Setting contents:
Auxiliary (Initial setting) / TV / DVD / Portable / Game
Playing MP3/WMA/AAC Data (Play Mode)
(CDE-178BT/CDE-175R only)
This unit can play back CDs containing both CD and MP3/WMA/AAC
data (created in Enhanced CD (CD Extra) format). However, in some
situations, playback of an enhanced CD may be difficult. In this case,
you can select playback of a single session only, containing the CD data.
When a disc contains both CD and MP3/WMA/AAC data, playback
starts from the CD data portion of the disc.
Setting item: Play Mode
Setting contents:
CD-DA / CDDA&MP3/WMA (Initial setting)
CD-DA:
Only the CD data in Session 1 can be played back.
CDDA&MP3/WMA:
CD data, MP3/WMA/AAC files in mixed mode, and multi-session
discs can be played back.
Note
Perform this setting before inserting a disc. If a disc has already been
inserted, remove it first.
Sound (Beep) Guide Function
This function will give audible feedback with varying tones depending
upon the button pressed.
Setting item: Beep
Setting contents:
OFF / Level 1~7
Note
The initial setting is Level 4.
Demonstration
This unit has a demonstration feature for the display.
Setting item: Demo
Setting contents:
OFF (Initial setting) / ON
Note
To quit Demo mode, set to Demo OFF.

Table of Contents

Other manuals for Alpine CDE-175R

Related product manuals