29-EN
Setting Adaptive Steering Remote Control
This unit is compatible with the adaptive steering remote control.
This function allows operation by sending the steering remote control
signal to the unit.
To use the steering remote control, perform the following button
operations after setting to ON and pressing ENTER.
For details, consult your nearest Alpine dealer.
Setting item: Steering
Setting contents:
OFF (Initial setting) / ON
1
Select the assigned function by turning the Rotary
encoder.
(e.g. Select SOURCE)
POWER SOURCE BAND VOL. UP VOL. DN PAUSE
MUTE BWD FWD P. U P P. D N POWER
2
Press the steering remote control button until the
changed signal value of steering remote control appears
in the left of the display.
(e.g. Press SOURCE of the steering remote control button.)
The changed steering remote control signal appears in the left
of the display.
3
Press ENTER to execute the setting value.
The confirmed signal value of steering remote control appears in
the right of the display. With doing so, the function of the unit is
assigned to the steering remote control button.
4
Repeat steps 1 to 3, and set each button.
When settings have been completed, press r to return to the
previous mode.
Display is selected on the setup main menu in step 2.
Changing Lighting Colour
You can change the lighting colour of the unit’s buttons.
Setting item: Illumination
Setting contents:
TYPE1 (Initial setting) / TYPE2 / TYPE3 / TYPE4
TYPE1 :
The colour of all buttons is blue.
TYPE2 :
The colour of all buttons is green.
TYPE3 :
The colour of all buttons is amber.
TYPE4 :
The colour of all buttons is red.
Dimmer Control
Set the Dimmer control to Auto to decrease the illumination brightness
of the unit with the head lights of the vehicle ON. This mode is useful if
you feel the unit’s backlighting is too bright at night.
Setting item: Dimmer
Setting contents:
Auto / ON (Initial setting) / OFF
Dimmer Level Setting
In the Dimmer Level setting, three levels are available, the highest level
(Level3) being the dimmest when the car headlights are on.
Setting item: Dimmer Level
Setting contents:
Level 1 (Initial setting) / Level 2 / Level 3
Scroll Type Setting
Choose from two scrolling methods.
Select the type you prefer.
Setting item: Scroll Type
Setting contents:
TYPE 1 (Initial setting) / TYPE 2
TYPE 1 :
The characters scroll from right to left, one character at a time,
until the entire title has scrolled.
TYPE 2 :
Words are built up from left to right, a single character at a time.
When the display is full, it is cleared and the subsequent words are
displayed the same way until all words of the title have been
shown.
Scroll Setting (Text Scroll)
This CD player can scroll the disc and track names recorded on
CD-TEXT discs, as well as the text information of MP3/WMA/AAC
files, folder names, and tags.
Setting item: Text Scroll
Setting contents:
Manual (Initial setting) / Auto
Manual:
The above information is scrolled only when a disc is loaded, a
channel or track is changed, etc.
The changed signal value of steering remote control
The conrmed signal value of steering remote control
Display Setting
To Next Page
Loading...
Need help?
General
Weight and Dimensions
