Alpine CDE-205DAB - System Settings and Information; System Settings and Configuration

22-EN
ALPINE CDE-205DAB 68-40368Z04-B (EN) 128x182
AUTO SCA
Perform
service
during
FIRMWA
R
(Availa
clock i
s
Checks
details,
FW VER
Display
FW UP
Enters
f
Updati
compl
e
ignition
USB de
Audio S
This setup
is off and t
EQ PRESE
Selects
curves
[USER]
,
[JAZZ],
[COUNT
The eq
for eac
3BAND P
E
Adjusts
each af
BAND:
Settin
g
FREQ],
BALANC
E
Adjusts
FADER
Adjust
s
SUBWOO
SUBW
Adjust
s
[OFF], [
SUBW
Settings
Canceling the DEMO Mode
You can cancel the demonstration display which
appears when the source is off and the clock is
displayed.
1 Press and hold /SETUP for at least 2
seconds, rotate the control dial to select
[GENERAL], then press it.
2 Rotate the control dial to select [DEMO
MODE], then press it.
3 Rotate the control dial to select [DEMO
OFF], then press it.
The setting is complete.
4 Press (back) twice.
The display returns to normal reception/play
mode.
Basic Setting Operation
You can set items in the following setup
categories:
General setup (GENERAL), Audio setup (AUDIO),
Display setup (DISPLAY), BLUETOOTH setup
(BLUETOOTH)
1 Press and hold /SETUP for at least 2
seconds.
2 Rotate the control dial to select the setup
category, then press it.
The items that can be set differ depending on
the source and settings.
3 Rotate the control dial to select the
options, then press it.
To return to the previous display
Press (back).
General Setup (GENERAL)
DEMO MODE (demonstration)
Activates the demonstration: [ON], [OFF].
CLOCK ADJ (clock adjust) (page 9)
CAUTION ALM (caution alarm)
Activates the caution alarm: [ON], [OFF] (page
9).
(Available only while the source is off and the
clock is displayed.)
BEEP
Activates the beep sound: [ON], [OFF].
AUTO OFF
Shuts off automatically after a desired time
when the unit is turned off: [ON] (30 minutes),
[OFF].
USB MODE
Changes the USB mode: [MSC/MTP],
[ANDROID].
(Available only when the USB source is
selected.)
RDS CT (clock time)
Activates the CT function: [ON], [OFF].
AF/TA (alternative frequencies/traffic
announcement)
Selects the alternative frequencies (AF) and
traffic announcement (TA) setting: [AF ON],
[TA ON], [AF/TA ON], [AF/TA OFF].
RDS REGIONAL
Restricts reception to a specific region: [ON],
[OFF].
(Available only when FM is received.)
DAB ANNOUNCE (DAB announcement)
Enables broadcast announcements: [ON],
[OFF].
DAB SOFTLINK
Searches for and tunes to the similar program
automatically when the signal of the current
program is too weak to receive: [ON], [OFF].
(Available only during DAB reception.)
DAB ANT-PWR (DAB antenna power)
Supplies power to the DAB antenna (aerial)
input terminal: [ON], [OFF]. (Available only
when the unit is turned off or during DAB
reception.)