17-EN
01GB05CDE-9881R.fm
ALPINE CDE-9881R 68-08564Z05-A (EN)
You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, Sound Customizing, Visual
Customizing, etc., can be modified.
1
Press and hold FUNC./SETUP for at least 2
seconds to activate the SETUP mode.
2
Turn the Rotary encoder to select the desired
SETUP menu, and then press / /ENT.
(e.g. Select SUBWOOFER)
FM-LEVEL RDS REGIONAL*
1
PI SEEK*
2
ILLUMINATION LCD CONTRAST DIMMER
SUBWOOFER (SUBW. SYSTEM)*
3
PLAY MODE
SCROLL TYPE TEXT SCROLL POWER IC
AUX+ SETUP LANGUAGE DEMO FM-LEVEL
*
1
Refer to “Receiving RDS Regional (Local) Stations” (page 9).
*
2
Refer to “PI SEEK Setting” (page 10).
*
3
Displayed only when SUBW is ON.
3
Turn the Rotary encoder to change the setting.
(e.g. Select SUBW. ON or SUBW. OFF.)
4
Press and hold FUNC./SETUP for at least 2
seconds to return to normal mode.
• Press AUDIO/RTN to return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Adjusting Source Signal Levels
If the difference in volume level between the CD player and FM radio is
too great, adjust the FM signal level.
Subwoofer On and Off
When the subwoofer is on, perform the steps below to adjust the
subwoofer output level.
1 In the normal mode, press AUDIO/RTN repeatedly to
select the SUBW mode.
2 Adjust the level by turning the Rotary encoder.
Setting the Subwoofer System
Select either SYS 1 or SYS 2 for the desired subwoofer effect.
Changing Lighting Colour
TYPE1 TYPE2
You can change the lighting colour of the following six buttons.
SOURCE/ , BAND/TA, , , , .
• CDE-9881R:
TYPE1: When the colour of the six buttons is green, the colour of the
other is green .
TYPE2: When the colour of the six buttons is amber, the colour of the
other is amber .
• CDE-9881RB:
TYPE1: When the colour of the six buttons is blue, the colour of the
other is red .
TYPE2: When the colour of the six buttons is red, the colour of the
other is red .
Adjusting Display Contrast
You can adjust the display contrast for better visibility.
• The initial setting at the factory is “0”.
Dimmer Control
Set the DIMMER control to AUTO to decrease the illumination
brightness of the unit with the head lights of the vehicle ON. This mode
is useful if you feel the unit’s backlighting is too bright at night.
• If your vehicle should have a dimmer control for the dashboardlights,
never connect the DIMMER cable (orange) of the radio to this
dimmer control.
SETUP
Use steps 1 to 4 to select one of the SETUP modes to
modify. See the applicable section below for details
about the selected SETUP item.
Sound Customizing
FM-LEVEL HI (Initial setting) / FM-LEVEL LOW
Rotary encoder
AUDIO/RTN
//ENT
FUNC./SETUP
SUBW. ON (Initial setting) / SUBW. OFF
SUBW BASS TREBLE BALANCE FADER
DEFEAT VOLUME SUBW
SUBW. SYS 1 (Initial setting) / SUBW. SYS 2
SUBW. SYS 1: Subwoofer level changes according to the main
volume setting.
SUBW. SYS 2: Subwoofer level change is different from the main
volume setting. For example, even at low volume
settings, the subwoofer is still audible.
Visual Customizing
ILLUMI TYPE1 (initial setting) / ILLUMI TYPE2
CONTRAST
You can adjust in a range of -5 and +3.
DIMMER AUTO (Initial setting) / DIMMER MANU
01GB00CDE-9881R.book Page 17 Monday, October 23, 2006 11:04 AM
To Next Page
Loading...
