8-EN
Turning Power On and Off
Play Position Memory Function
If you turn power off or switch the ignition key to OFF during
playback, playback will continue from the point where
playback stopped when the power is turned ON again. The
play position memory is cancelled when the disc is
removed.
1
Press PWR of the remote control.
The power turns on.
2
To turn the power off, press PWR again.
3
Closing the cover
Slide the cover as illustrated until a click is heard.
Warning
DO NOT OPERATE ANY FUNCTION THAT TAKES
YOUR ATTENTION AWAY FROM SAFELY DRIVING
YOUR VEHICLE.
Any function that requires your prolonged attention should
only be performed after coming to a complete stop. Always
stop the vehicle in a safe location before performing these
functions. Failure to do so may result in an accident.
To Next Page
Loading...
