47-EN
Operating the TUE-T200DVB (Optional)
Operable when optional TUE-T200DVB is connected.
When DVB-T is selected in “Adjusting the AUX name Mode”
(page 22), the source is displayed in AUX selection screen.
1
Press
SOURCE to activate mode switching
screen.
2
Slide the display horizontally with your finger to
select Audio/Visual mode.
Each time you slide the display, the mode switches
circularly in the following order:
Audio/Visual Navigation Camera Telephone
Multi Info Audio/Visual
3
Slide the display vertically with your finger, or press
SOURCE repeatedly to select DVB-T source.
4
Touch the DVB-T source window displayed in the
centre of the screen.
The DVB-T source is activated and the display changes to
the DVB-T main screen.
5
Perform the desired operation.
Channel Number Up/Down or Favourite Channel Number
Up/Down
Touch [CH.]*
to select changing the Channel or the
Favourite Channel.
Touch CH. [ ] or [ ] to move the Channel number Down/Up.
Touch FAV. [ ] or [ ] to move the Favourite Channel number
Down/Up.
* The button displays the current changing mode ([CH.] or [FAV.]).
Calling up Main Menu Screen
Touch [MENU] to call up the main menu screen.
Calling up Menu Operation Mode
1
Touch [P1/2].
The function guide appears.
2
Touch [MENU CONT] to call up the menu operation
mode.
Switching the Source
Touch [BAND].
The source switches with each touch.
Calling up Electronic Programme Guide (EPG)
Touch [EPG] to call up the Electronic Programme Guide.
Scanning Mode
1
Touch [P1/2].
The function guide appears.
2
Touch [A.MEMO] to start the auto scan procedure.
• For detail, refer to the Owner’s Manual of the TUE-T200DVB (sold
separately).
Switching the Video Input Type
1
Touch [P1/2].
The function guide appears.
2
Touch [NTSC/PAL].
The video input type switches with each touch.
Video Menu Operation of TUE-T200DVB
1
Touch [P1/2].
The function guide appears.
2
Touch [ ].
The direct touch mode screen is displayed.
• When the optional TUE-T200DVB is connected, you can control it by
the touch key (except the [Control] key) on the display screen of the
unit.
3
Touch [Control].
Return to DVB-T main screen.
• If no operation is performed for 5 seconds, the screen will
automatically switch to the full screen mode.
TUE-T200DVB
Operation (Optional)
To Next Page
