48-EN
An optional CD Changer may be connected to this unit if it is Ai-NET
compatible. With a CD Changer connected to the Ai-NET input of this
unit, the CD Changer will be controllable from this unit.
If you connect a changer compatible with MP3, you can play
CD-ROMs, CD-Rs, and CD-RWs containing MP3 files on this unit.
Using the KCA-410C (Versatile Link Terminal) multiple changers can
be controlled by this unit.
See the Multi-Changer Selection section for selecting the CD Changers
(explained on
page 48).
Playback
1
Press
SOURCE to activate mode switching
screen.
2
Slide the display horizontally with your finger to
select Audio/Visual mode.
Each time you slide the display, the mode switches
circularly in the following order:
Audio/Visual Navigation Camera Telephone
Multi Info Audio/Visual
3
Slide the display vertically with your finger, or press
SOURCE repeatedly to select CD CHG. source.
4
Touch the CD CHG. source window displayed in the
centre of the screen.
The CD CHG. source is activated and the display changes
to the CD CHG. main screen.
• The source name in the display changes from CD CHG. to USB when
“Setting the USB Adapter to ON/OFF” (page 23) is set to ON.
5
Touch
[ ]
or
[ ]
to select the desired track (file).
Returning to the beginning of the current track (file):
Touch [ ].
Fast backward:
Touch and hold [ ].
Advancing to the beginning of the next track (file):
Touch [ ].
Fast forward:
Touch and hold [ ].
6
To pause playback, touch
[ ]
.
Touching [ ] again will resume playback.
Selecting a Disc (Changer) (Optional)
When a Disc CD Changer is connected:
Touch DISC [ ] or [ ] to select the desired DISC.
When an MP3 compatible CD changer is
connected:
1
Touch [P1/2] to change the Function Guide display.
2
Touch DISC [ ] or [ ] to select the desired DISC.
• When an MP3 compatible CD changer is connected, the unit can
play discs containing both audio data and MP3 data.
• The DVD changer (optional) is controllable from this unit as well as
the CD changer.
• For operation of the connected DVD changer (DHA-S690), refer to
the Owner’s Manual of DHA-S690.
• When the optional DVD changer (DHA-S690) is connected to this
unit, touching [NTSC/PAL] after touching [P1/4] three times will
change the video input.
Multi-Changer Selection (Optional)
When using KCA-410C (Versatile Link Terminal), you can connect two
changers.
In changer mode, touch [CHG SEL] twice to select the
next changer (connected changers only).
Select the desired Folder (Folder up/
down) (MP3 Changer mode)
If you listen to an MP3 file from a selected folder, the folder can be
changed.
Touch FOLDER [ ] or [ ] to select the folder.
The first file in the selected folder is played back.
Repeat Play
Touch [ ] repeatedly to select the repeat playback
mode.
The file will be played repeatedly.
* When an MP3 compatible CD changer is connected.
• To cancel, select off in the above procedure.
• When set Repeat to off, turns to grey.
• If Repeat Disc is set to ON during M.I.X. One play in CD changer
mode, M.I.X. will apply to the current disc only.
Changer (Optional)
Repeat One : Only a file is repeatedly played
back.
Folder
*
: Only files in a folder are
repeatedly played back.
Disc : A disc is repeatedly played
back.
Off : Repeat mode is turned off.
To Next Page
