35-EN
FR
ES
DE
SE
IT
Mounting the base unit
● Velcro Fastener Mounting
Attach to the vehicle (such as under the
dashboard).
Flanged self-tapping
screw (M4 x 14)
Velcro fastener
● Using the Mounting Screws (Supplied)
The Base Unit can be mounted under the seat
using the mounting screws.
1 Decide on the installation location.
• The trunk, etc., is the best place.
2 Mark the positions of the mounting screws at the
chosen location.
3 Drill 3 mm (1/8”) holes or smaller.
WARNING
When making holes, be careful not to damage
pipes, tanks, electric wires, etc. Doing so could
lead to accidents or fire.
4 Securely mount the unit using the four included
flanged self-tapping screws (M4 x 14).
To Next Page
Loading...
