To Next PageTo Next Page
Need help?Do you have a question about the Alpine PXA-H700 and is the answer not in the manual?
General| Type | Digital Sound Processor |
|---|---|
| Category | Car Audio Processor |
| DAC | 24-bit |
| Input Impedance | 10 kΩ |
| Time Alignment | Yes |
| Crossover | Yes |
| Bluetooth | No |
| USB | No |
| Outputs | RCA |
| Output Impedance | 100 Ω |
| Operating Voltage | 11-16V DC |
| Channels | 8-channel (7.1 channel processing) |
| Total Harmonic Distortion | 0.005% |
| Equalizer | 31-band |
Configures speaker settings, including turning off unused channels.
Details how the unit is powered on and off via the connected head unit.
Explains the status indicators for PRO LOGIC II, Dolby Digital, and DTS modes.
Provides instructions on using the Rotary encoder for settings and adjustments.
Guides through automatic measurement and analysis of speaker distances for optimal time correction.
Explains manual calculation and setting of time correction values and speaker phase switching.
Allows adjustment of time difference between front-rear/left-right speakers in pairs.
Details how to customize sound using a 31-band graphic equalizer for each speaker channel.
Covers fine-tuning sound with adjustable center frequency, bandwidth, and level.
Describes setting active crossover filters (HPF/LPF) and slopes for frequency band splitting.
Explains how to adjust Media Xpander settings for enhanced vocal and instrument clarity.
Details how to adjust low frequency sound characteristics to personal taste.
Guides on utilizing Pro Logic II processing for surround sound from two-channel sources.
Presents a step-by-step guide for accurate Dolby Digital and DTS sound reproduction.
Covers configuring speaker settings (size, response) based on playable frequency range.
Explains using test tones to balance speaker output levels for optimal presence.
Describes mixing front channel audio into rear speakers for improved rear seat sound.
Details distributing center channel information to left/right speakers for a simulated front soundstage.
Explains compressing dynamic range for energetic sound, similar to movie theaters.
Covers setting volume levels for Dolby Digital, Pro Logic II, DTS, and PCM modes.
Guides on configuring navigation voice messages to interrupt audio output.
Explains setting output channels (2 or 3) for linear PCM recorded discs.
Covers adjusting display contrast and LCD mode (positive/negative).
Details setting MX mode automatically or manually when using an Ai-NET head unit.
Explains recalling previously saved settings from memory presets (1-6).
Guides on saving current adjustments and settings into memory presets (1-6).
Describes temporarily flattening all settings to their default values.
Covers cycling through spectrum analyzer and input channel display modes.
Explains changing the illumination color of the PXA-H700's switch.
Provides critical safety warnings regarding installation and unit handling.
Outlines important precautions for safe and proper installation procedures.
Lists the included accessories required for installation and connection.
Offers a visual guide for connecting various components to the PXA-H700.
Presents diagrams illustrating system configurations with other Alpine components.
Defines key audio terms such as Dolby Digital, Dolby Pro Logic II, LPCM, and DTS.
Offers a troubleshooting guide for common operational problems and setup issues.
