To Next PageTo Next Page
Need help?Do you have a question about the Alpine PXA-H800 and is the answer not in the manual?
General| Time Correction | Yes |
|---|---|
| S/N Ratio | 110dB |
| Channels | 8 |
| Digital Signal Processing | Yes |
| Input Voltage | 14.4V (11-16V allowable) |
| Weight | 1.5 kg |
| DAC | Burr-Brown |
| EQ Type | Parametric |
| Inputs | Optical Digital |
| Outputs | 8 RCA |
| THD | 0.005% |
| Category | Audio Processor |
| Dimensions | 50 mm |
| Frequency Response | 20 Hz to 20 kHz (±1 dB) |
Explains how to interpret the manual's layout and sections.
Identifies the physical controls and indicators of the PXA-H800 unit.
Briefly describes the main functions and capabilities of the PXA-H800.
Outlines the initial setup steps required before operating the unit.
Guide to installing the PC software for PXA-H800 setup and adjustments.
Covers initial system start-up, Ai-NET connections, and power management.
Includes saving/loading data, Fader, Balance, Volume, Presets, and system settings.
Details ImprintEQ, Auto TCR, RoadEQ, EQ settings, Crossover, and Time Correction.
Configuring playback modes, EUPHONY, Dolby Pro Logic II, and speaker levels.
Covers initial setup, power, Commander display, and basic audio adjustments.
Saving and recalling stored settings and adjustments using the Commander.
Setting up speaker systems, subwoofers, and AUX input systems via Commander.
Includes MX Plus, EQ modes, Graphic EQ, Parametric EQ, Crossover, and Time Correction.
Configuring playback modes, EUPHONY, Dolby Pro Logic II, and speaker levels.
Covers Mute, Backlight Off, Display settings, and Illumination via Commander.
Safety warnings and preparation for automatic measurement functions.
Using ImprintEQ memory and Auto TCR for automatic time correction.
Using RoadEQ for automatic EQ adjustment based on road noise.
Configuring MX Plus for Ai-NET linked or standalone operation.
Choosing EQ mode and adjusting Graphic and Parametric EQs.
Adjusting crossover filters (HPF/LPF) and speaker phase.
Manually calculating and setting speaker time delay.
Covers Mute function, Backlight Off, and display brightness adjustment.
Customizing button illumination color and switching display modes.
Details speaker system configurations and RCA input patterns.
Explains audio technologies like Dolby Digital, Dolby Pro Logic II, and LPCM.
Provides solutions for common problems and error indications.
Lists technical specifications, dimensions, and included accessories.
