Alpine PXA-H800 - Setting and Adjusting the AUX Input;Digital Input; Setting the AUX Volume Input Level; Adjusting the AUX Volume Level; Setting the Analog;Digital AUX Input

•
Refer to Table
2
(Input System) in
"System Configuration" (page
60).
Click
[OK]
when a confirmation message appears.
The AUX Gain Setup screen is displayed.
3
Click either [High] or [Low] for each AUX to set and
click [OK].
High: When the volume level of the external input is high.
Low: When the volume level of the external input
is
low.
4 Click [OK]
when a confirmation message appears.
Exit Sound Manag
er
for
PXA-H800.
Turn
the ignition key
to
off, and then on again. The settings become effective.
• Gain can also
be
set in "Setting
the
AUX
Volume
Input level
(AUXIN
Gain)"
(page 15).
•
When the
AUX
input system is changed, all the setup values
for
AUX
input will
be
restored to the initial setup values.
•
After the setting,
it
is
recommended to sto
re
th
e setting contents on
the unit. For details, refer to
"Storing
the Preset
Valu
es
(Preset
Store
)"
(page 12 ).
Setting
and
Adjusting
the
AUX
Input/
Digital
Input
(Analog
AUX
Input/Digital
AUX
Input)
This step sets and adjusts the Analog
AUX
and Digital
AUX.
•
When
an
Ai
-
NET
compatible head unit is connected, external input
of
the
PXA-HBOO
becomes unavailable,
and
this setting will be
disabled.
1
Click
[Input
Setup] for [Shortcut] tab
in
the main
menu.
The
In
put
System Setup screen i
s displayed.
•
If
you click [I/O Configuration] on the Function switching tab, and
then [Input
System Setup], the Input
System Setup
screen will also be
displayed. Refer to
"Operating
the Function Switching
Tab"
(page
7)
.
2
For each AUX,
click [ON]I[OFF],
[High]/[Low],
or
[.A.
]I
[~]to
set and adjust each item.
From
a
PC
Setting the Analog AUX
Input
Setting item: AUX
1-3
*
1
/Ai-NET(HU)
*
2
/
Ai-NET(CHG)
*
2
Setting contents: AUX
IN/AUX
IN
Gain/AUX Levei/AUX
Name
*
1
The number
of
AUX
channels
to
be set varies depending on the
system set in
"Setting
the
AUX
Input System
(AUX Input
System
Select)"
(page
14).
~When
you connect Ai-NETIRCA Interface cable (KCA-12JB) to the
terminals
of
the device Head Unit input terminal (Ai-NET input)
I
Changer input terminal (Ai-NET input), you can use it as AUX.
Setting the Digital AUX Input
Setting item: Digitai1/Digital2
Setting contents: Digital
AUX
/AUX Name
3
When setting is complete,
click [Close Window].
• After the setting, it is recommended to store the setting contents on
the unit.
For
details, refer to
"Storing the Preset
Values
(Preset
Store)"
(page
12).
A
TV
or
VCR with RCA audio output can be connected to the unit.
Select
OFF
the external input not
is
connected (Initial setting:
"ON").
Setting item: AUX
IN
Setting contents: ON/OFF
• AUXJ
cannot be set.
Select OFF
if
no
optical digital product is connected (Initial setting:
"ON").
Setting item: Digital
AUX
Setti
ng
contents:
ON/OFF
If
the external input audio becomes distorted,
se
le
ct
High (Initial
setting:
"High
")
.
Setting ite
m:
AUXIN
Gain
Setting
co
ntents: High/Low
High:
Wh
en the volume level of the external input is high.
Low: When the volume level of the external input is low.
•
This item becomes possible to set only when
AUXIN
setting
is
on.
• You
can only adjust the Analog AUX with this setting.
You can adjust the volume level
of
the external RCA input. Adjust this
when the
vo
lume is higher
or
lower compared to that
of
the optical
digital source (Initial setting: "0
dB
").
Setting
item: AUX Level
Setting contents: -10
to
+
10
dB
•
This
it
em becomes possible to set only when
AUXIN
setting is
on
.
•
You
can only adjust the Analog AUX with this setting
.
15
-
EN