To Next PageTo Next Page
Need help?Do you have a question about the Alpine ERA-G320 and is the answer not in the manual?
General| Brand | Alpine |
|---|---|
| Model | ERA-G320 |
| Category | Computer Hardware |
| Language | English |
Ensure vehicle temperature is within +60°C to -10°C before operating the unit.
Avoid direct sunlight, high humidity, dust, and excessive vibrations.
Replace blown fuses with ones of the same amperage (3A).
Do not attempt self-repair; return to dealer or service station for issues.
Turn the unit ON/OFF using the head unit's power switch.
Adjust input level from head unit for optimal sound quality.
Adjust audio levels, balance, fader, and subwoofer settings using the MODE button.
Toggle backlighting colour between green and amber by pressing the ILLUM button.
Input level adjustment not needed; other controls managed by the head unit.
Switch between 7 and 14 bands; activate dual mode for separate front/rear EQ.
Select from six factory presets and adjust equalizer settings for personal taste.
Select BBE modes (1, 2, 3, OFF) and create custom BBE curves.
Select from six DSP surround environments and adjust their settings.
Store custom equalizer, BBE, and surround settings into memory presets.
Switch between different display patterns and normal/inverted modes.
Adjust speaker time delay to optimize sound stage for listener position.
Adjust time delay for each speaker to compensate for listener-speaker distance differences.
Save custom time correction values to memory presets.
Control factory presets for EQ, Surround, and BBE modes using the remote.
Save and recall equalizer and time correction settings using the remote.
Adjust L.P.S. settings using the remote control.
Activate or deactivate the BBE/Surround circuit using the remote (RUE-4160).
Adjust EQ, Surround, and BBE settings, create custom BBE curves via remote.
Adjust and store time correction settings using the remote control.
Check ignition, power connections, and fuses if the unit does not function after installation.
Details electrical, physical, and performance specifications of the device.
