4
EnglishEnglish/Français/Español
Temperature
Be sure the temperature inside the vehicle is
between +60°C (+140°F) and –10°C (+14°F)
before turning your unit on.
Installation Location
Make sure the ERA-G320 will not be
exposed to:
• Direct sun and heat
• High humidity
• Excessive dust
• Excessive vibrations
Replacing Fuses
Replace the fuse with one with the same
amperage (3A).
Maintenance
If you have problems, do not attempt to repair
the unit yourself. Return it to your Alpine
dealer or the nearest Alpine Service Station
for servicing.
Caution
ERA-G320 allows three different modes of
system as "1) 7 Band EQ + Surround + LPS
+ BBE", "2) 14 Band EQ + LPS + BBE" and
"3) 7 Band EQ + 7 Band EQ (Dual EQ) + LPS
+ BBE".
When the mode is changed, all systems
should be reset to change the program for
DSP. This resetting is made automatically
when you push the key of switching mode
and cause to clear stored memory of presets.
Not to delete your stored presets, please
determine the mode you use and have
attention not to switch the mode after making
your presets.
Precautions
+60°C
–10°C
3A
To Next Page
Loading...
