Customizing
EUPHONY
You
can customize the sense
of
ambience (localization and ambience)
of
the cabin sound field and the balance (Level) between surround
channels and save the settings.
1
Click
[Custom]
for
"EUPHONY."
The EUPHONY custom screen
is
displayed.
2
Click
[Standard], [Wide],
or
[Off] in
the
"Localization/
Ambience"
to
choose
the
localization/ambience.
ON
9.!
Standard
~Wide
OFF
~
Custom
Memory
Standard: Setup of the regular ambience of LsiRs sound.
Choose this for a subtle expansion
in
sound.
Wide: The ambience of LsiRs sound is more easily
recognizable. Use this when you want brightness
and crispness.
OFF:
This disables EUPHONY.
3
Adjust
the
localization/ambience
for
each channel.
Drag
[@]
for
"Localization/Ambience"
or
click
LA.]
or
[T
].
Setting channel: C (Center), L (Left Front) I R (Right Front),
Ls
(Left Surround) IRs (Right Surround)
Setting contents: 0.0 to 1.0 (in 0.05 steps)
4
Click
either
lEI]
or
lEI]
for
"UR
Group."
II: Both R and L channels are set at the same value.
Ill:
Channels R and L can be set independently.
• When you select
"~~,"a
message
to
confirm which
of
the R or L
channel set up values is
to
be applied will be displayed. Click either
[LEFT]
or
[RIGHT].
5
Adjust
the
level
for
each channel. Drag
[@]
for
"EUPHONY
Output
Level"
or
click
LA.]
or
[T
].
Setting channel: C (Center), L (Left Front) I R (Right Front),
Ls
(Left Surround) IRs (Right Surround)
Setting contents: -12 to 0 dB (in 0.05 steps)
From a
PC
6
Click
[Store]
for
"Custom
Memory"
to
save
the
settings.
The Memory selection screen
is
displayed.
7
Click
either
[Custom
1 ],
[Custom
2],
or
[Custom
3]
and
click
[OK].
8 When
setting
is
complete,
click
[Close Window].
• This setting is only available for 2-channel signal playback.
•
If
you click [Call]
in
Step
6,
you can call and readjust the stored
setting values. Click either [Custom
1}, [Custom
2],
or
[Custom
3}
in
the setting value selection screen and click
[OK].
• By clicking IJ
of
"Mute" while
in
the adjustment mode, you can
mute the selected channel.
Using Dolby Pro
Logic
II (Dolby Pro
Logic
II)
Pro Logic processing can
be
applied
to
the music signals recorded
in
2-
channel stereo. This gives normal 2-channel stereo a more live, concert
hall effect. When you select "Music," you can adjust the center width.
This function provides the optimum vocal localization by adjusting the
center channel localization
in
between the center speaker and the L/R
speakers. (Initial setting: "Music")
1
Click
[T]
for
"2ch
Playback
Mode"
and select and
click
[Dolby
Pro
Logic
II]
from
the
pull-down
menu.
ALPINE
PXA-HSOO
Sound
M<1nage1
2
Click
either
[Music]
or
[Movie]
for
"Dolby
Pro
Logic
II."
ALPINE
PXA-HSOO
Sound
M<1n<1ger
X
File([) Option(Ql
Shortcut Multi ct·1annel
l•11anager
•
2ch
Playback Mode
Dolt)~·
Pro
Logic
II
• )
EUPHON'/
Dolby Pm
LOf_1iC
II
Center
V\•ldlh
Custom
P..COUSTIC
'-'
Mu:3ic
...,
l•11ovie
Level 0
MultiC~1anneiBetup
Music: Suits stereo
TV
shows and all programs encoded
in
Dolby Surround. Creates a sound field directivity
near that of discrete 5.1-channel sound.
Movie: Can be used for all stereo music recordings, and
provides a wide, deep sound field.
•
For
details on Dolby Pro Logic
II,
see page
61.
• This function only works with 2-channel signals.
31-EN
To Next Page
Loading...
