7 When
the
setting
is
complete, press and
hold
[
~]
for
at least 2 seconds.
•
If
[
~
]
is
pressed during setting, the unit returns to the previous
item.
• After the setting, it is recommended to store the setting contents on
the unit. For details, refer to
"Storing the Preset Values (Preset
Store)" (page 36).
Naming
the
AUX
Input
(AUX
Name)
When you connect an external input product, you can assign it a name
of
your choice. After setting the value to ON in "Setting the AUX Input
(AUX IN)" (page 39), "Setting the Digital Input (Digital AUX)"
(page 40), set this item (Initial setting: "Auxiliary").
1 Press [FUNC.].
2 Rotate
the
[Rotary encoder]
to
select
"Input
Setup;'
and then
press
the
[Rotary encoder].
3 Rotate the [Rotary encoder]
to
select "AUX Name,"
and then press the [Rotary encoder].
The AUX selection screen
is
displayed.
4 Select
the
AUX you
want
to
set
by
rotating
the
[Rotary encoder], and press
the
[Rotary encoder].
Settings item: AUX 1/AUX 2/AUX 3/Ai-NET(HU)/Ai-
NET(CHG)/Digital 1/Digital 2
• The number
of
AUX
varies depending on the
AUX
Input Setup
(page 39).
5 Select from "Auxiliary," "TV," "EXT.DVD," "Portable,"
and
"Game"
by
rotating the [Rotary encoder], and
press the [Rotary encoder].
6 To set
another
AUX, press [
~
] and repeat Steps 4
and
5.
7 When the
setting
is
complete, press and
hold
[
~
]
for
at least 2 seconds.
• When an
Ai-NET
compatible head unit is connected, the audio
settings are adjusted at the head unit, and you cannot set them on the
unit itself
•
If
[
~
]
is
pressed during setting, the unit returns
to
the previous
item.
• After the setting, it is recommended to store the setting contents on
the unit. For details, refer to
"Storing the Preset Values (Preset
Store)" (page 36).
From
the
Commander
Mixing
Navi
Audio
Guidance
(Navi
Mix
Setup)
When a navigation system
is
connected, its voice guidance will be
mixed with the system and output from the front speakers (Initial
setting: "OFF"). You can adjust the navigation guidance volume. (Initial
setting:
"0
dB")
1 Press [FUNC.].
2 Rotate the [Rotary encoder]
to
select
"Input
Setup,"
and then press
the
[Rotary encoder].
3 Rotate
the
[Rotary encoder)
to
select "Navi Mix
Setup," and then
press
the [Rotary encoder].
The
NAVI
MIX
SETUP
screen
is
displayed.
4 Rotate
the
[Rotary encoder]
to
select
"ON"
or
"OFF,"
and then
press
the [Rotary encoder].
•
NAVI
MIX
SETUP
~~~~~~~(i~F=
~~I
OFF:
No mixing of the navigation voice guidance.
ON: Navigation voice guidance
is
mixed.
•
If
you select [ON], set the setting value.
5 Press [
~
]
for
at least 2
seconds
to
go
back
to
the
normal
mode, and repeatedly
press
the
[Rotary
encoder].
The
NAVI
LEVEL
adjustment screen will be displayed.
6 Rotate the [Rotary encoder]
to
make adjustment.
•
t·~A'•.•'I
LEI.IEL
J!~f
Ll
1
11
~
LEVEL
±
(]dE:
Setting contents: -10 to +10 dB
7 When the
setting
is
complete,
press[~].
•
If
[
~
] is pressed during setting, the unit returns to the previous
item.
• For the connection
of
a navigation system, refer to the installation
manual.
41-EN
To Next Page
Loading...
