Alpine PXA-H800 - Preset Data Call Operation Upon Initial Start-Up; Addition of Preset Memory Items; Subwoofer Level Adjustment When Ai-Net Is Connected

Rresef
"
Pata
call
Operatloh~)tln
::
lnitilll
~:
S1art:up
"··
·
With Ver.l.l
00
and
Ver.2.1
00,
preset data saved
on
the unit can
be
called up at the first start-up after battery power has been disconnected
once.
If
an Ai-NET compatible head unit is connected, preset data can also be
called up from the head unit.
•
To
call up preset data from the head unit, refer
to
the Owner's
Manual
of
the head unit.
After
calling up the data, turn the ignition
key to the
OFF
position, and then turn it back to the
ON
position.
Until this procedure has been performed, the settings will not be
applied,
and
audio will not be output.
<From a PC>
1
When Sound
Manager for
PXA-H800 is started up for
the first time,
click [Call]
for
"Preset"
on the
message screen.
2
Click
one from [Preset 1] to [Preset 6], and then
click
[OK].
3
Click [OK]
when a confirmation message appears.
Ex
it Sound Manager for
PXA-H800.
Turn
the ignition key to
off, and then on again. The settings become effective.
4-EN
<From the Commander>
1
For
first
time startup, press the [Rotary encoder]
or
[FUNC.].
2
Rotate the [Rotary encoder] to
select "Preset,"
and
then press the [Rotary encoder].
3
Select
a preset from "P.1"
through
"P.6" by rotating
the [Rotary encoder], and press the [Rotary
encoder].
The
"
Turn
ACC Off"
screen will
be
displayed.
Turn
the
ignition key to the
OFF
position, and then back to the
ON
position again. The settings become effective.
Navigation audio guidance interrupt ON/OFF
setting and Navigation
audio guidance volume adjustment have been added to the items
to
be
stored in preset memory.
•
The following
item has been added to the
list
of preset items
in
"Storing the
Preset Values (Preset Store)"
(page 12)
in
the
Owner's Manual
-
PC
guide.
Setting/Adjusting the Navigation Guidance
Volume
(Navi
Mi
x)
•
The
following
item has been added to the list
of preset items
in
"S
toring
the
Preset Values (Preset Store)"
(page 36) in the
Owner's
Manual
- Commander guide.
!Mixing Navi Audio Guidance (Navi Mix Setup)
Page
41
If
the software is updated to Ver.2.1
00,
subwoofer level can be adjusted
using the
PC
software
or
Commander when any
of
the below Ai-NET
compatible head units is connected. For details on operation, refer to
"Audio Adjustment"-"Adjusting
Subwoofer (SubW
Lv)"
(page 12),
"Audio Adjustment"-"Adjusting Subwoofer (SUB WOOFER)"
(page
35) in the Owne
r's
Manual-
PC or Commander guide.
iDA-X305/ iDA-X305S/ CDA-9884/ CDA-9885/ CDA-9885L/ CDA-
9886/ CDA-9887/ CDA-1
05/
CDA-1
05L/
DVA
-9965
I
iXA-W404/
iXA-W407