13
Click [OK].
Following the instructions
on
the screen, disconnect the
USB
cable and then exit Sound Manager for PXA-H800.
Turn
the ignition key
to
the
OFF
position, connect the
USB
cable, and then turn the ignition key back to the
ON
position.
(Setting the system)
14
Start Sound Manager for
PXA-HSOO.
The initial start-up message screen appears.
15
Click [OK].
The Output System Select screen appears.
For
subsequent operations, refer to "Setting the Speaker
System (Output System Select)" (page 13), "Setting the
AUX Input System (AUX Input System Select)" (page
14)
in
the Owner's
Manual-
PC
guide to set up the system.
• Preset data cannot be called
by
clicking
[Call]for
"Preset" until
preset data
is restored.
Viewing the Version Information
1 Start Sound Manager for
PXA-HSOO.
2 Click [Option(O)].
3 Click [Version Information (V)].
Make sure that all software versions are 2.100.
4 Click [OK].
Restoring the Preset Data
1 Start Sound Manager for
PXA-HSOO.
2 Click [File(F)], and then click [Restore Preset Data
(R)].
"Open File" box will be shown.
3 Select the file backed up
in
Step 5
in
"Update
Software", and click [Open].
The selected file
is
loaded.
•
To
use the restored preset data, refer
to
"Recalling a Stored Setting
(Preset Call)" (page
13
or 37) in the Owner's
Manual-
PC
or
Commander guide.
Supplementary
Information
of
Owner's
Manual
Supplementary explanations and corrections
in
the Owner's Manual are
provided.
Menu
items
of
Sound
Manager
for
H800 . ·.
The menu items
of
Ver.l.IOO/Ver.2.100 are as follows.
Preset data backup and restoration
Preset data can be backed up and restored.
Backup:
[File(F)]-
[Backup Preset Data(B)]
Restoration
[File(F)]-
[Restore Preset Data(R)]
Software download
Software for both the PXA-H800 and Commander can be downloaded.
PXA-H800:
[Option(O)]-
[PXA-H800 Software Download(M)]
Commander:
[Option(O)]-
[RUX-C800 Software Download(F)]
3-EN
To Next Page
Loading...
