Alpine PXA-H800 - Entering Numerical Values

7
Click either [em] or [inch.]
em: The unit for the time correction becomes
"em."
inch: The unit for the time correction becomes
"inch."
8 Drag
[~]
of
the
channel
you want to adjust
to
the
right
or
left.
Or
click
either
£1111
or
£al1
to set.
217
:::cn·1
6.35
ms
Setting
contents:
0.00
to
20.00
ms (in
0.05
ms steps)
•
Channels to be
set
vary
depending on the system set in
"Setting
the
Speaker System (Output System
Select)"
(page 13).
•
By clicking
[--]
while
in
the adjustment mode, you can
mute the selected channel. Click { ] again to output
audio.
•
You
can listen with Defeat
OFF
(adjusted setup values)
or
with
Defeat
ON
(Initial value) to compare,
by
clicking either
[ON]
or
[OFF]
of
"Defeat"
in the main menu while in the adjustment mode.
9
When setting is
complete, click [Close Window].
•
To
enable this function, Defeat should be is set to ON.
•
When the speaker is set to the
"OFF"
mode, the time correction
fo
r
that speak
er
cannot be set. Refer to
"Setting
the Speaker System
(Output System
Select)" (page
13)/"Setting
the Speakers (Speaker
Setup)/Setting the
Subwoofers"
(page 14).
•
Sound may arrive at the listening position at slightly different times,
depending on the subwoofer and enclosure. After this setting, preview
the sound and adjust as necessary. A
cor
rection
of
JOms
(
135.0 inch/
343.0
em) may be necessary.
•
After the setting,
it
is recommended to store the setting conte
nts
on
the unit. For details, refer to
"Storing
the Preset Values (Preset
Store)" (page 12).
From
a
PC
Entering
numerical values
You can directly enter the distances (actual measurements) to all the
speakers to make adjustments.
1 Click
[Value Input].
2
Click [em] or [inch].
3
Enter the number directly
or
click
Ll\1
or
[V]
to enter
the
actual
measurements (distances to the
speakers).
Setting
contents:
inc
h:
0.0
to
270.1
em:
0.0
to
686.0
4
Click
[OK].
The mode
will
change to the
channel
UR
individual
adjustment mode. The number you enter
will
be
reflected
in
the setting screen.
29
-EN