From
the
Commander
4
Select one from "OFF"
and
"Level1"
through "Level
3"
by rotating the [Rotary encoder], and press the
[Rotary encoder] .
•
LEVELAD~USTMENT
Level
1
Level1: Low correction
level.
Suitable
tor quiet vehicles.
Level
2:
Moderate correction
level.
Level
3:
High correction
leve
l.
Suitable tor high speed
driving.
•
If
you do not use RoadEQ is not used, select
"OFF"
.
5
When the setting is complete, press and hold [
~
]
for at least 2 seconds.
•
If
[
~
] is pressed during setting, the unit returns to the previous
item.
•
If
measurement
is
not yet completed,
or
no microphone is connected,
this setup
is
disabled.
•
When
you
change the speaker setting
of
On/Off.
RoadEQ
automatically becomes
off
When you have changed the speaker
settings, start the measurement step over again.
•
After the setting, it is recommended to store the setting contents on
the unit.
For
details,
ref
er to
"Storing the Preset
Values
(Preset
Store)"
(page 36).
44-EN
Audio
Setup/
Adjustment
REMOTE
COMUAN:!ER
llUX
-CBOD
~/
/I..PfiE
II
FUNC.
Rotary encoder
Setting
the
MX
Plus
(Ai-NET
Mode)
MX (Media X pander)
Plus
enhances the vocal and
in
strumental sounds
for music sources such as
radio/CD/MP3,
by generating harmonics lost
during digital processing. This high frequency compensation adds
clarity and detail normally lost to road noise.
This feature becomes enabl
ed
when an Ai-NET compatible head unit
with MX
Plus linking function is connected.
IfMX
Plus
mode is set for
each source beforehand, it automatically switches according to the
music source
of
the head unit.
•
When a
he
ad
unit with the MX Plus
linking function,
such as
IN
A-
W910, is connected, it shou
ld
be set to Ai-NET mode. Other head
units should be set in the Standalone mode.
1
Press [FUNC.].
2
Rotate the [Rotary encoder] to select
"MX Plus,"
and
then press the [Rotary encoder].
3
Rotate the [Rotary encoder]
to
select
"MX
Plus
Setup," and then press the [Rotary encoder].
r r
4
Rotate the [Rotary encoder] to select
"ON,"
and then
press the [Rotary encoder] .
•
MX
PLUS
SETUP
ON
•
Wh
en you select [OFF],
MX
Plus
for
all music sources becomes
disabled.
5
Rotate the [Rotary encoder] to select
"Ai-NET," and
then press the [Rotary encoder].
MX
Plus will become linked to the head unit.
•
When a head unit without the MX
Plus
/inking function is connected,
this should be set as
"Standalone,"
even
if
it
is an At-NET compatible
he
ad
unit.
To Next Page
Loading...
