From
a
PC
Use the Multi
Channel
Function
Setting
the
2-Channel
Signal
Playback
Mode
(2ch
Playback
Mode)
These steps
set
the 2-channel signal playback mode.
1 Click [Multi Channel Manager] of the Function
switching tab.
Multi Channel Manager tab screen will be displayed.
• Refer to "Operating the Function Switching Tab" (page
7).
2 Set and adjust "2ch Playback Mode," "EUPHONY,"
"Dolby Pro Logic
II."
• When both Rear
and
Center speakers are
off
in "Setting the Speaker
System
(Output System Select)" (page 13)1 "Setting the Speakers
(Speaker
Setup)/Setting the Subwoofers" (page 14), this item cannot
be set.
•
After
the setting, it is recommended to sto
re
the setting contents
on
the unit. For details, refer to "Storing the Preset Values (Preset
Store)" (page 12
).
When playing back 2-Channel Stereo, select a playback mode best
suited to the music. (Initial setting:
"Stereo")
1 Click
[T]
for "2ch Playback Mode" and select and
click the playback mode you want from the pull-
down menu.
ALPINE PXA-H800
Sound
Manager
Setting contents: Stereo/Rear Fiii/EUPHONY/Dolby Pro
Logic
II
Stereo:
Rear Fill:
EUPHON
Y:
Plays back in 2ch stereo.
Outputs
th
e front signal from the rear.
Plays back in
5.
1 channel surround
(page 30).
Dolby
Pr
o Logic
II
Pl
ays back in Dolby
Pro
Logic
II
surround (page
31
).
• For linear PCM, the front signals are sent
to
the r
ear
channel even
if
the system is set
up
for
"Stereo."
• "Re
ar
Fill" function
Depending
on
the input signals, the sound may only be output from
the front speakers. In this case, the
"Rear Fill" function can be used
to output signals from the rear speakers as well.
30-EN
•
lf
the setting
of
Rear Fill
is
made when
Rear
Mix is
ON,
sound is
unchanged
in the rear fill setting because Rear Mix is given priority
during
2 channel decoder other than linear PCM.
EUPHONY creates 5.1 channel surround using Adaptive Surround
technology based on a music signal recorded in 2-channel.
When you set up
EUPHONY and play back a
CD
or iPod stereo source,
you can enjoy the realistic sensation
of
musicians playing around you.
For
DVD movie playback, you can enjoy the sense
of
localization
of
the
dialogue and impressive three-dimensional sound effects.
In this setting,
EUPHONY Mode can be selected. (Initial setting:
"ACOUSTIC
")
1 Click
[T]
for "2ch Playback Mode" and select and
click [EUPHONY] from the pull-down menu.
ALPINE PXA-H800
Sonnd
Manager
-X
•
lfyou
click [EUPHONY]
for
[shortcut] tab
in
the main menu, the
Multi Channel Manager tab screen can also be displayed
and
you
can
set
up EUPHONY.
2 Click
[T]
for "EUPHONY" and select and click the
mode from the pull-down menu.
AlPINE
PXA-H800
Sotuul
Manager
Setting content
s:
ACOUSTIC:
LIVE:
CINEMA:
TV
SHOW:
Custom 1/Custom
2/
Custom
3:
ACOUSTIC/LIVE/CINEMNTV SHOW/
Custom 1/Custom 2/Custom 3
Localization is emphasized; the
mode with regular sound field
resonance.
Ambience is emphasized; the mode
in
which sound field resonance is
more strongly felt.
Mode suitable for movie audio.
Dialogues are reproduced clearly
and sound effect is
cr
i
sp
.
Mode suitable for broadcasting
audio such as
th
e digital
broadcast
in
g.
Th
ese can be select
ed
only when
EUPHONY is customized
in
"Customizing EUPHONY" (page 3
1).
• This function only works with 2cchannel signals.
To Next Page
Loading...
