EasyManua.ls Logo

Alpine PXA-H800 - Installing Sound Manager Software; From a PC; Basic Operation with PC Software

Alpine PXA-H800
98 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installing
Sound
Manager
for
PXA-H800
When you install Sound
Manager for
PXA-H800 on a
PC,
you can set/
adjust the audio settings on the
PC.
Caution before
installing:
This Program runs under Microsoft® Windows®
XP,
Vista, 7
only.
Recommended specifications
OS:
Windows
XP,
Windows Vista , Windows 7
CPU: 1.6
GHz
or higher
Memory: 1
GB
or higher
HOD:
512MB
or more
available
space
Display:
1024x576 or higher
Install the
Sound
Manager software for
PXA-HSOO
before
connecting the
PXA-HSOO
to your
personal
computer.
Before
installing, all
active programs must
be
stopped.
1
Insert
the
supplied
CD-ROM (Sound Manager for
PXA-HSOO)
into the CD-ROM drive. Run the
setup.exe
file. Follow
the
installation
instructions on
the screen.
2 Connect a PC to Computer connection
terminal
of
PXA-HSOO
with the included USB cable.
~HII@l
USB
Cable
[§I
...
. ;
Install the
PXA-HBOO
in
your
vehicle before you connect a
PC
to it
(r
efer to the Installation manual).
Tum
the
ignition key to the
ACC
or
ON
position.
3 Start Sound Manager for
PXA-HSOO.
~CAUTION
Strictly
observe the Warnings
and Cautions written
by
the
manufactures
of
your
PC
and peripheral e
quipm
ent.
We
do
not accept responsibility for data lost
due
to
the
incorrect operation
of
the
Sound
Manager for
PXA-H800.
We recommend you to back-up your important
data
regularly.
About the
OFFLINE
mode
Sound
Manager for
PXA-H800
checks the connection with the
PXA-
H800
at startup. When the connection is detected, it starts
in
the online
mode.
If
the connection is not detected, a message will
be
displayed.
To
start the
PXA-HSOO
in
the
offline
mode,
click [OFFLINE].
To
set in the
offline
mode, perform the
following steps to
reflect
the
setti
ngs
on the
PXA-HSOO.
1
After making adjustments and settings, save the
data on
the
PC, referring
to
"Saving the Setup Data
(File)"
(page 1 0).
2
Close
Sound Manager for
PXA-HSOO.
3
Connect
to
the
PXA-HBOO
to
your PC and start
Sound Manager for
PXA-HBOO
in the
online
mode.
Install the
PXA-
HBOO
in your vehicle befo
re
you connect a
PC
to
it
(refer
to
the Installation manual). Turn the ignition key to the
ACC
or
ON
position.
4
Load the data saved on the PC referring to
"Loading
the
Setup Data (File)"
on page
10.
The setti
ngs
of
Sound
Manager for
PXA-HSOO
are reflected
on the
PXA-H800.
9-EN

Table of Contents

Other manuals for Alpine PXA-H800

Related product manuals