From
the
Commander
Use
the Multi
Channel
Function
CHANNEL
II
Rotary encoder
Setting
the
2-Channel
Signal
Playback
Mode
(Mode)
When playing back
2-Channel
Stereo, select a playback mode best
suited to the music. (Initial setting:
"Stereo")
1
Press [FUNC.].
2
Rotate the [Rotary encoder] to select
"Playback
Mode," and then press
the
[Rotary encoder].
3
Rotate
the
[Rotary encoder] to select
"Mode,"
and
then press the [Rotary encoder].
The Mode selection screen is displayed.
4
Select the playback mode you want by rotating the
[Rotary encoder], and press the [Rotary encoder].
II"
MODE
Rear
Fill
Setting content
s:
Stereo/Rear
Fii
i!EUPHONY/Dolby
PLII
Stereo:
Re
ar
Fi
ll
:
EUPHO
NY
:
Dolby
PLII:
Pl
ays back in 2ch ster
eo.
Outputs the front signal from the
re
ar.
Plays back in 5
.1
channel surround (page
52).
Plays back in Dolby
Pro
Logic
II
surround
(page 53).
5
When the setting is complete, press and hold [
~
]
for at least 2 seconds.
•
If
[
~
]
is
pr
essed during setting, the unit returns
to
the
pr
evious
item.
•
For lin
ear
PCM,
the front signals are se
nt
to the r
ear
channel even
if
the system
is
set
up
for
"
St
ereo."
• "Rear Fill"
function
Depending on the input signals, the sound
ma
y o
nl
y be output from
the front speakers.
In
this case, the "Rear Fill"
function can
be
used
to output signals from the re
ar
speakers as well.
52-EN
•
If
the setting
of
Rear Fill is made when Rear Mix is
ON,
sound is
unchanged in the rear fill setting b
ec
ause
Rear
Mix is
given priority
during
2
channel decoder other than linear
PCM.
•
When both Rear
and
Center speakers are
off
in
"Setting
t
he
Speaker
System (System
Select)"
(page
37)/"Setting
the Speakers
(S
peaker
Setup)"
(page 38), this item cannot
be
set.
•
After the setting,
it
is recommended to store the setting contents on
the unit. For details, re
fer
to "Storing
the Preset
Values
(
Pr
eset
Store)"
(page 36).
Setting
EUPHONY
(EUPHONY)
EUPHONY
creates 5.1 channel surround using Adaptive
Surround
technology based on a music signal recorded in 2-channel.
When you set up
EUPHONY
and play back a CD
or
iPod
stereo source,
you can enjoy the realistic sensation
of
musicians playing around you.
For DVD movie playback, you can enjoy the sense
of
localization
of
the
dialogue and impressive three-dimensional sound effects.
In this setting,
EUPHONY
Mode can be selected. (Initial setting:
"ACOUSTIC")
1
Press [FUNC.].
2
Rotate the [Rotary encoder] to select "Playback
Mode,"
and then press the [Rotary encoder].
3
Rotate the [Rotary encoder] to select "Mode
,"
and
then press the [Rotary encoder].
The Mode selection screen is displayed.
4
Rotate the [Rotary encoder] to select
"EUPHONY,"
and then press the [Rotary encoder].
5
Press[~].
This
wi
ll take you back to the Step 3 screen.
6 Rotate the [Rotary encoder] to select
"EUPHONY;'
and then press the [Rotary encoder].
7
Rotate the [Rotary encoder]
to
select the
mode,
and
then press the [Rotary encoder].
II"
EUPHONY
ACOUSTIC
Setting contents
ACOUSTIC/LIVE/CINEMA/TV SHOW/
Custom 1/Cust
om 2/Custom 3
ACOUST
IC:
Localization is emphasized; the mode with
regular sound
fi
eld
re
sonance.
LIVE:
Ambience is emphasized;
th
e mode in which
sound field resonance is more strongly fe
lt.
CINEMA:
Sound suitable for movie audi
o.
Dialogues are
reprodu
ce
d clearly and sound e
ff
ect is crisp.
TV
SHOW:
Sound suitable for broadcasting audio such as
the digital broadcasting.
•
Custom 1/Custom 2/Custom 3 can
be
selected only when the feature
is set
on
a
PC
(s
ee
"Customizing
EUP
HONY
"
page 31
).
To Next Page
Loading...
