Alpine PXA-H100 - Specification

Specifications
* Head Unit and CD Changer are connected.
* 2WAY(FRONT/REAR/SUB W.) / 3WAY switch is set to 2WAY.
< CD >
Channel Balance (TCD-782, 1kHz) 0±3dB
Distortion (TCD-782, 1kHz) 0.1%
Frequency Response (TCD-782, Ref. 1kHz, 0dB) 17Hz : 0±3dB
127Hz : 0±2dB
10.007kHz : 0±2dB
19.997kHz : -1±4dB
S/N Ratio (TCD-782) 70dB
Separation (TCD-782, 1kHz) 55dB
Back-up Current (ACC-OFF after 1 minute) 5.0mA
Pre Output (TCD-782 (1kHz, 0dB), T.H.D.1%) / Impedance 12 +3/-2dBV / ch / 10k ohm
Sub-Woofer Output Level -15±3dB
(Ref. FRONT Pre-Out, TCD-782 (1kHz, 0dB), Sub-Woofer STEP 0)
< CD SHUTTLE >
Channel Balance (TCD-782, 1kHz) 0±3dB
Distortion (TCD-782, 1kHz) 0.3%
Frequency Response (TCD-782, Ref. 1kHz, 0dB) 17Hz : 0±3dB
127Hz : 0±2dB
10.007kHz : 0±2dB
19.997kHz : -1±4dB
S/N Ratio (TCD-782) 70dB
Separation (TCD-782, 1kHz) 55dB
Difference of Output Level (Ref. CD, TCD-782 (1kHz, 0dB)) 0±3dB
< GENERAL >
Power Supply 14.4V DC
Dimensions (W x H x D) 110 x 25 x 85mm
Weight 0.35kg
NOTE : Due to Continuing product improvement, specifications and designs are subject to change without notice.
13