36
English
Basic Operation
Adjusting Parametric-EQ
(Continued)
While the frequency is still displayed, press the
or button to adjust for the desired level.
1
F
125 +4 1.0
3
While the frequency is still displayed, press the
TCR button to adjust for the desired Q-Factor.
To advance to the next band, repeat the steps
1 to 4.
Notes: • Each adjustment should be made
within 5 seconds.
• In the Defeat ON mode, the Paramet-
ric EQ adjustments cannot be
performed.
1
F
125 +4 2.0
4
TCR
To Next Page
Loading...
