38
English
Basic Operation
Storing in Memory
You can store your personally adjusted settings
for Parametric-EQ, Time Correction and the
settings obtained with Auto Adjustment in
memory.
When you have adjusted the settings for your
preference and you wish to store them in
memory, press and hold the MEMO button for
at least 2 seconds.
The Memory indicators blink for 5 seconds
showing the unit is ready for storing.
Press the or button to select one of the
MEMO location numbers (MEMO 1 to MEMO 6)
into which you want to store your settings.
MEMO 1
MEMO 2
MEMO 3
MEMO 4
MEMO 5
MEMO 6
→→→→→→
1
2
MEMO
MEMO –
Press the MEMO button to store in memory.
If you want to store more, repeat the steps
above.
Notes: • Each operation should be performed
within 5 seconds.
• In the Defeat ON mode, the memory
operation cannot be performed.
• If the supplied microphone is not
connected, the memory operation
cannot be performed.
3
MEMO
To Next Page
Loading...
