Alpine PXA-H600 - Precautions; Temperature Limits; Fuse Replacement Guidelines; Maintenance and Servicing

8
English
Precautions
Temperature
Be sure the temperature inside the vehicle is
between +60˚C (+140˚F) and –10˚C (+14˚F)
before turning your unit on.
Fuse Replacement
When replacing the fuse(s), the replacement
must be of the same amperage as shown on
the fuse holder. If the fuse(s) blows more than
once, carefully check all electrical connections
for shorted circuitry. Also have your vehicle's
voltage regulator checked.
Maintenance
If you have problems, do not attempt to repair
the unit yourself. Return it to your Alpine dealer
or the nearest Alpine Service Station for
servicing.
Installation Location
Make sure the PXA-H600 will not be exposed
to:
• Direct sun and heat
• High humidity
• Excessive dust
• Excessive vibrations
PARAME. EQ
FREQUENCY
LEVEL Q.FACT
BAND F
MEMO
SUB.W TCR
OVER
R
EQ
DEF.
MODE/SUB W
AUTO ADJ.
AUTOMATIC SUBWOOFER FINE TUNING DIGITAL PHASE PROCESSOR
PXA-H600 CONTROL UNIT
RUA-4260
MEMO
TCR