To Next PageTo Next Page
Need help?Do you have a question about the Alpine SPR-10TW and is the answer not in the manual?
General| Impedance | 4 Ω |
|---|---|
| Rated power | 100 W |
| Sensitivity | 88 dB |
| Speaker type | 2-way |
| Frequency range | 65 - 29000 Hz |
| Tweeter magnet type | Neodymium |
| Subwoofer included | No |
| Shape | Round |
| Separate components | Yes |
Weight and Dimensions| Mounting depth | 59 mm |
|---|---|
| Mounting hole diameter | 136 mm |
Details flush swivel and concealed stealth mounting techniques for the tweeter.
Illustrates the procedure for adjusting the tweeter's vertical position.
Provides precise physical measurements and diagrams for the tweeter assembly.
Shows how to connect the tweeter to the amplifier and adjust its output level.
Lists key technical parameters including power, impedance, sensitivity, and frequency response.
Warns against parallel connection with existing tweeters to prevent damage.
Guides on proper amplifier usage, gain controls, and speaker rating to prevent damage.
Explains advantages of registering the product, including updates and promotions.
Details what the warranty covers, its duration, and specific items not covered.
Outlines the procedure for submitting products for warranty repair or replacement.
Covers limitations on implied warranties and exclusions for incidental/consequential damages.
Specifies Canadian warranty validity requires installation by an authorized center.
Provides phone numbers and website for warranty service and support.
