Alpine TZL178 - Quick Tip #2: Light Connector Check

5
3. From the back opening of the fountain take the
vinyl tubing and attach it to the Pump nozzle,
then place the pump back into the fountain
making sure it sits at the bottom
Note: Tubing and LED light cords may be zip-
tied together. Cut zip-ties with scissors (careful
not to puncture tubing) to separate.
4. Pull out the LED light cord plug through the
back opening & connect to the transformer.
Alpine Quick Tip #2
Check all light connectors
to make sure they are
tight. Fountains with
multiple lights have
additional connections
inside the fountain.