EasyManua.ls Logo

Alpine TZL198 - User Manual

Alpine TZL198
2 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
TZL198
6 Tier Rainforest
Fountain
Limited Warranty Information
Thank you for choosing an Alpine product! We aim to please with our wide range of products including
Fountains, Birdbaths, Statuary, Pond Supplies & More. All of our products are constructed from the
highest quality materials. In the event that we have not achieved our usual standard of excellence, we
will repair or replace, at our discretion, within the warranty period. A valid proof of purchase, with the
purchase date clearly indicated, must be provided. Photos of defective merchandise will also be
required to help distinguish the actual cause of the defect. Please read below for a detailed
description of warranty coverage.
Water Damage
Alpine products are not manufactured to withstand extreme temperatures. Improper storage
that allows water to freeze within a product may cause damage and is considered negligence
and will, therefore not be covered under this warranty. The use of “hard water” and/or caustic
cleaners can affect the paint or other finishes. Failure to keep the unit clean, and use of such
additives/cleaners, will also void the warranty. Please note: for fountains, it is normal for some
splashing to occur and protecting the immediate surfaces is not the responsibility of Alpine
Corporation
Paint & Color (Retention and/or Loss)
The use of water will cause natural erosion to the color. This area can be touched up
using standard paint. The paint is designed to protect the entire finish against breakdown
of color. As with any product, all finishes with time will gradually fade and discolor. The
warranty will only cover against severe or complete fading within the first year from date of
purchase with the above exclusion.
Procedure/Service
Should a warranty/claim be needed, you should contact the retailer from whom you purchased
the product. If that is not an option, you can contact Alpine Corporation at www.alpine4u.com.
When contacting Alpine Corporation, you must be prepared to show proof of purchase,
provide photographs and any other information needed to validate your claim. This may be
necessary to distinguish between a partial or complete replacement of a defective product.
The warranty does not cover any items with multiple parts; the warranty will ONLY cover the
individual component of the unit/item that may be defective. Replacement parts can be made
available to a consumer through the original selling party, or an approved parts retailer. If this
is not an option, contact our customer service department. Item is covered under one year
limited warranty from the date of purchase. When requesting replacement parts due to a
warranty claim after 30 days of purchase, credit card information will be requested for shipping
charges.
Not Covered Under Warranty
The limited warranty will NOT cover cases of damages due to
1. Damages caused in Transit
2. Inadequate care and/or neglect
3. Environmental and/or natural elements
4. Immersion in water, unless specified
5. Improper Installation/Storage and/or Maintenance
This warranty is void if the product has been damaged by accident, misuse, negligence, improper
installation and/or modifications have occurred. This includes any and/or all defects arising out of
freezing water damage, hard water damage, failure to keep the unit clean and free of harmful additives
such as bleach, chlorine, etc…. which affects the paint and/or parts. This warranty also does not cover
any additional charges or installation, removal, disposal and/or shipping costs or consequential damage
associated with any warranty claim.
Question and Answer IconNeed help?

Do you have a question about the Alpine TZL198 and is the answer not in the manual?

Summary

Limited Warranty Information

Water Damage Exclusion

Excludes damage from improper storage, freezing, or use of caustic cleaners.

Paint & Color Fading

Covers severe fading within the first year, excludes natural erosion and gradual fading.

Warranty Claim Procedure

Details steps for warranty claims, proof of purchase, and replacement parts.

Items Not Covered Under Warranty

Lists damages not covered, including transit, neglect, environmental factors, and misuse.

Assembling and Using the Fountain

Assembly Instructions

Step-by-step guide for setting up the fountain, connecting components, and adding water.

Fountain Care Recommendations

Advice on using distilled water, cleaning, and maintaining the fountain.

Troubleshooting and Cautions

Pump Operational Issues

Addresses common problems like pump failure, spewing, and abnormal noises with solutions.

General Operating Cautions

Safety advice including unplugging before cleaning, avoiding dry operation, and water temperature.

Overview

This document describes the TZL198 6 Tier Rainforest Fountain, an Alpine Corporation product designed for decorative use.

Function Description:

The TZL198 is a multi-tiered fountain designed to create a rainforest-like water flow. It includes a submersible pump to circulate water, an LED light for illumination, and a transformer to power the electrical components. The fountain is intended for use with clean water, creating a soothing visual and auditory experience.

Important Technical Specifications:

  • Model: TZL198
  • Type: 6 Tier Rainforest Fountain
  • Components: Fountain unit, LED Light, Submersible Pump, Transformer, Back Cover.
  • Power Source: Local power supply (requires plugging in cords for LED lights and pump).
  • Water Temperature: Do not operate with water above 90°F or 30°C.
  • Water Type: Recommended to use distilled water to prevent scale build-up.
  • Pump Operation: The pump should always be fully submerged in water; never let the pump run dry.
  • Transformer: Do not exceed the maximum voltage and wattage on the transformer.

Usage Features:

  • Assembly: The fountain requires assembly, starting with placing the base on a smooth, level surface. The pump's flow control should be set to the lowest setting initially to prevent splashing during assembly. The vinyl tubing connects the fountain to the pump, which is then placed in the reservoir. The LED light cord connects to the transformer. A back cover is then replaced over the opening.
  • Water Filling: Water should be gently poured into the fountain, ensuring the pump is completely submerged for clear water flow.
  • Initial Operation: When first operated, it may take up to 5 minutes for air to be expelled and water to flow properly.
  • Placement: The power source and plugs should always be kept in a dry place, away from water.
  • Water Quality: Using distilled water is recommended to prevent scale build-up. Alpine's natural cleansing formulas (PPL100 for fountains up to 7 liters, PPL102 for fountains over 7 liters) are recommended to eliminate foam, lime scale, calcium buildup, fight mineral deposits, keep water crystal clear, prevent staining, remove organic contaminants, and treat discolored water, which also helps prevent pump damage from hard water.
  • Troubleshooting - Pump Failure: If the pump fails to run, check the circuit breaker or try a different outlet. Inspect the pump discharge and tubing for kinks or obstructions, and flush any buildup with a garden hose. Check the rotor by removing the front cover and plate, ensuring it's not jammed or broken.
  • Troubleshooting - Pump "Spewing": If the pump spews, check the water level to ensure the pump is fully submerged and there is enough water in the basin. Insufficient water will cause spewing.
  • Troubleshooting - Abnormal Loud Noises: Disconnect the pump, remove the front cover and plate, gently pull out the impeller/rotor assembly, rinse it, and clean the cavity with clean water. If breakage is found, contact the retailer.
  • Safety Precautions: Always unplug the pump from the electrical outlet before cleaning or handling. Use with clean water only; do not place the fountain or parts in other liquids. Do not lift, carry, or pull the pump by the power cord.

Maintenance Features:

  • Cleaning: Periodically change the water and clean the pump to keep it free from micro-organisms. This is crucial for maintaining water quality and pump longevity.
  • Storage: Disconnect and store the unit in a dry place when not in use for an extended period.
  • Warranty: The product comes with a one-year limited warranty from the date of purchase.
    • Coverage: The warranty covers severe or complete fading within the first year (excluding natural erosion of color), and defective individual components (not multiple parts).
    • Claim Procedure: For warranty claims, contact the retailer of purchase or Alpine Corporation at www.alpine4u.com. Proof of purchase with a clear date and photographs of the defect are required.
    • Exclusions: The warranty is void if the product is damaged by:
      • Accident, misuse, negligence, improper installation, or modifications.
      • Freezing water damage.
      • Hard water damage.
      • Failure to keep the unit clean and free of harmful additives (e.g., bleach, chlorine).
      • Improper storage allowing water to freeze.
      • Damages caused in transit.
      • Inadequate care and/or neglect.
      • Environmental and/or natural elements.
      • Immersion in water (unless specified).
      • Improper installation/storage and/or maintenance.
    • The warranty does not cover additional charges for installation, removal, disposal, shipping, or consequential damage.
    • Replacement parts for warranty claims after 30 days of purchase may incur shipping charges.

Alpine TZL198 Specifications

General IconGeneral
BrandAlpine
ModelTZL198
CategoryOutdoor Fountain
LanguageEnglish

Related product manuals