To Next PageTo Next Page
Need help?Do you have a question about the Alpine WIN1136 and is the answer not in the manual?
Operating Environment| minimum operating temperature | 41°F / 5°C |
|---|---|
| maximum operating temperature | 90°F / 30°C |
Power| voltage | 120V |
|---|
Water System| water capacity | 0.34 US Gallons / 1.3 Liters |
|---|---|
| tubing diameter | ½” I.D. |
Improper storage allowing water to freeze causes damage and is not covered.
Color may fade over time; warranty covers severe fading within the first year.
Contact retailer or Alpine Corp. with proof of purchase for warranty claims.
Excludes transit damage, neglect, environmental factors, immersion, and improper maintenance.
Place the fountain base on a smooth & level surface, ensuring space to access the pump.
Remove pump, adjust flow to lowest setting to avoid splashing until assembly is complete.
Check power supply, kinks in tubing, or obstructions in the impeller area.
Ensure the pump is fully submerged in adequate water to prevent spewing.
Disconnect power, clean impeller and pump housing for potential damage or blockage.
Always unplug the pump before cleaning and handling; do not exceed voltage/wattage.
Use clean water only; do not place fountain or parts in other liquids.
Do not operate below 41°F/5°C or above 90°F/30°C. Never let the pump run dry.
Flowing water adds a soothing sound to any environment.
Made of lightweight, durable fiberglass.
LED light in the basin is long-lasting, energy-efficient, and creates a stunning display.
