Alpine WIN1136 - Replacement Parts and Accessories

• Replacement Pump ……………………...P065
• Replaceable Transformer……….….....PL022T
• Replacement LED Light………… RLS100-YLW
• Fountain Care Formula…………….....PPL100
Foam and scale remover for indoor and outdoor fountains.
• Americana® UV Acrylic Sealer ...……RRR106
Provides protective clear coating for all painted surfaces.
• Touch Up Paint Kit....…………….…....RTD102
Includes primer, thinner, 7 paint colors, applicator and sealer.
3. From the back opening of the fountain connect the
vinyl tubing from inside the fountain into the water
pump, then place the pump back into the fountain.
NOTE: Pump may already be attached to tubing.
Ensure the connection is tight before operation.
3. Pull out the LED light cord plugs through the back
opening & connect to the attachments on the
pump. Twist the protective sheath clockwise to
cover and secure the connection.
REPLACEMENT PART ITEM#
8
ALSO AVAILABLE FROM ALPINE
Alpine Quick Tip #2
Check all light
connectors to make
sure they are tight.
Fountains with multiple
lights have additional
connections inside the
fountain.