Alpine WIN582 - Replacement Part

• Submersible Stream Pump ……………..P180
• Replaceable Transformer……….….....PL022T
• Replacement LED Light……………… RLS100
• Fountain Care Formula…………….....PPL100
Foam and scale remover for indoor and outdoor fountains.
• Americana® UV Acrylic Sealer ...……RRR106
Provides protective clear coating for all painted surfaces.
• Touch Up Paint Kit....…………….…....RTD102
Includes primer, thinner, 7 paint colors, applicator and sealer.
3. From the back opening of the fountain connect the
vinyl tubing from inside the fountain into the water
pump, then place the pump back into the fountain.
4. Pull out the LED light cord plug through the back
opening & connect to the transformer.
5
REPLACEMENT PART ITEM#
8
ALSO AVAILABLE FROM ALPINE
Alpine Quick Tip #2
Check all light connectors
to make sure they are
tight. Fountains with
multiple lights have
additional connections
inside the fountain.