User Manual i4MC&V/EN M/C
iSTAT i4MC&V
Page 14
3. SETTINGS
3.1 Introduction
Instrument settings can be remotely modified with the QDSP software, when connected to a
PC.
3.2 QDSP Software
QDSP
is a software tool for complete monitoring of measuring instruments, connected to a
PC via serial or USB communication. A user-friendly interface consists of five segments:
devices management, instrument settings, real-time measurements, data analysis and
software upgrading. The QDSP software is available free of charge.
A separate QDSP manual is available that defines the operation of QDSP in detail.
3.2.1 Devices Management
The communications parameters for any connected device can be modified. Also included
are browsers which scan the communications networks attached to the PC and identify all of
the devices connected with their addresses and communications parameters. This can be
done on RS232, RS485 or USB (programming only) connections.
3.2.2 Instrument settings
The instrument settings are organized in a tree structure and they can be modified simply as
required. In addition to transferring settings to the instrument, QDSP can also store the data
to settings files and read it back when required.
3.2.3 Real time measurements
All measurements can be displayed in real time in a table.
If further processing of the measurement data is required it can be copied via a clipboard
and inserted into standard Windows formats.
3.2.4 Software upgrading
It is suggested that the latest version of QDSP should always be used and if the system is
also connected to the internet if will define if an upgrade is available for download.
To Next Page
Loading...