i4MC&V/EN M/C User Manual
iSTAT i4MC&V
Page 23
5. COMMUNICATIONS
5.1 Communications ports
The i4MC/V is optionally fitted with a primary communications (COM) port
COM can be RS232 or RS485
The communications port can be used for settings and the monitoring of data.
The communication parameters of the i4MC/V can be obtained by using the ‘Scan the
network’ feature in the QDSP setting software.
5.2 QDSP Setting and Monitoring Software
See the se
parate QDSP Manual for details of how to Install and use the QDSP Software.
5.3 MODBUS
Two versio
ns of MODBUS register tables are available:
VERSION 1: Compatibility with advanced family of transducers (i500)
VERSION 2: Compatibility with previous family of transducers (i400)
For details, see Appendix A
To Next Page
Loading...