i4MC&V/EN M/C User Manual
Page 4
iSTAT i4MC&V
5. TECHNICAL SPECIFICATIONS
5.1 Protective fuse rating
The recommended maximum rating of the external protective fuse for this equipment is 6A,
Red Spot type or equivalent, unless otherwise stated in the technical data section of the
product documentation.
Insulation class: IEC 61010-1: 2001
Class II
EN 61010-1: 2001
Class II
.
Insulation Category
(Over voltage):
IEC 61010-1: 2001
Category III
EN 61010-1: 2001
Category III
Distribution level, fixed
installation. Equipment in this
category is qualification tested at
5kV peak, 1.2/50 µs, 500 ,
0.5J, between all supply circuits
and earth and also between
independent circuits.
Environment: IEC 61010-1: 2001
Pollution degree 2
EN 61010-1: 2001
Pollution degree 2
Compliance is demonstrated by
reference to generic safety
standards.
Product Safety:
2006/95/EC
EN 61010-1: 2001
Compliance with the European
Commission Low Voltage
Directive.
Compliance is demonstrated by
reference to generic safety
standards.
To Next Page
Loading...