030519 A7 Owner's Manual 2
UNPACKING
IMPORTANT: Protect the Loudspeaker
The loudspeaker cone assemblies are fragile and should not be touched.
Step 1
Before removing the protective shipping material, look for obvious signs of
shipping damage such as severely crushed corners or deep punctures that may
have marred the speaker cabinet. If severe damage
has occurred, immediately contact the shipping
company to file a claim.
Step 2
Using a knife, carefully cut away any plastic which is
holding the cardboard-encased speaker to the pallet.
Step 3
Use snips to cut the straps holding the cardboard-
encased speaker to the pallet.
Step 4
Open top of box and then slide the box up off of
the speaker. The grill and horn mounting
brackets are packaged separately inside the
shipping box.
Step 5
Remove the protective cardboard, foam, and
plastic packaging material.
IMPORTANT: Use Caution when Moving the Loudspeaker
Because each A7 weighs approximately 200 pounds, use caution when moving
the loudspeaker to avoid personal injury. Use multiple people or a dolly and
protective blankets when moving the loudspeaker off of the pallet and to its final
location.
IMPORTANT: Retain the Packaging Material
If there is a need to return the loudspeaker under warranty conditions, you will
need the packaging material to properly repackage the loudspeaker for transit.
To Next Page
Loading...
Need help?
General
