Altec Lansing inMotion iM3 Quick Start Guide

Altec Lansing inMotion iM3

2 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

5A

iPod

30/40GB

iPod

10/15/20GB

1

2

1

2

2

1

iPod

mini

iPod

photo

5B

1G / 2G

iPod

1

2

4

3

?

2

1

inMotion iM3

Other manuals for Altec Lansing inMotion iM3

User Guide44 pages

Questions and Answers:

S
stephanie74Aug 15, 2025
Why is there no sound coming from my Altec Lansing Docking Speakers?
- D
  Danielle WilliamsAug 15, 2025
  There might be several reasons for the lack of sound. First, ensure the power is on and the universal power supply cord is properly connected to both the wall outlet and the power supply jack. Also, the volume might be set too low, so try increasing it using the '+' button. Check that your iPod is correctly seated in the docking station, or if you're using a 3.5mm stereo cable, verify it's securely connected to both the audio source and the correct output, such as 'line-out,' 'audio-out,' or the headphone jack. Finally, the problem might be with the audio source itself, so test the speakers with another audio source.
J
Jenny LeeAug 18, 2025
How to fix Altec Lansing inMotion iM3 Docking Speakers when the power LED is not lit in AC Operation?
- R
  Richard MillerAug 18, 2025
  If the power LED isn't lit during AC operation, check these potential causes: Ensure the universal power supply cord is properly connected to a functioning wall outlet and plugged into the power supply jack on the back of the system. If you're using a surge protector, make sure it's switched on. Test the wall outlet with another device to confirm it's working. Also, verify that the power switch is in the 'On' position and the stand-by button is pressed (the LED should turn green).
Q
qhowellAug 21, 2025
What to do if the Altec Lansing inMotion iM3 remote control is not working?
- G
  gonzalespatrickAug 21, 2025
  If the remote control isn't working, the batteries might be low; try replacing them. Also, ensure that you are pointing the remote control directly at the IR window on the system and are within 15 feet of the unit.
D
danielmillsAug 25, 2025
Why is the sound distorted on my Altec Lansing inMotion iM3?
- C
  crystalbarrettAug 25, 2025
  Sound distortion can occur if the volume level on the system is too high; try decreasing it using the '-' button. Also, the distortion may be due to the sound source being of poor quality. Try a different audio source, such as a music CD, to see if the issue persists. Some file types like WAV and .MID are often of poor quality.
P
Patricia GoodmanAug 27, 2025
How to stop crackling sounds from Altec Lansing Docking Speakers?
- T
  Thomas DorseyAug 27, 2025
  A crackling sound from the speakers can often be attributed to a bad connection. Check the connection if your iPod is in the docking station. If you're using a 3.5mm stereo cable, ensure it's properly connected to the 'line-out,' 'audio-out,' or the headphone jack on your sound card or audio source, and not the 'speaker-out.' If the problem persists, the issue might be with your audio source. Try unplugging the 3.5mm stereo cable from your current audio source and plugging it into the headphone jack of an alternate source, such as a Walkman, Discman, or FM radio.
C
Crystal GallegosAug 30, 2025
Why won't the power LED light up on my Altec Lansing inMotion iM3 Docking Speakers when using batteries?
- O
  Olivia YoungAug 30, 2025
  If the power LED doesn't light up when using battery operation, first ensure that (4) AA batteries are correctly installed into the battery compartments located on the bottom of the system, following the illustration inside the battery compartments. Also, verify that the power switch is in the 'On' position and press the stand-by button (LED will turn green).
B
Brandi WrightSep 2, 2025
What causes distorted sound from Altec Lansing Docking Speakers when connected to a PC or laptop?
- R
  royrodriguezSep 2, 2025
  If the sound is distorted when connected to a PC or laptop, the volume level in the operating system might be set too high. Check the operating system volume level and decrease it if necessary.
C
Christopher MarshallSep 5, 2025
Why do my Altec Lansing inMotion iM3 make a crackling sound when connected to my PC or laptop?
- C
  craigharperSep 5, 2025
  If you're hearing a crackling sound when the speakers are connected to your PC or laptop, it could be due to the volume level in your operating system being set too high. Try checking the operating system volume level and decreasing it if necessary.
P
Patricia JonesSep 8, 2025
Why is the power LED on my Altec Lansing inMotion iM3 Docking Speakers turning amber?
- H
  Heather AndersonSep 9, 2025
  If the power LED is turning amber, it indicates that the batteries are low. You should replace the batteries.

Altec Lansing inMotion iM3 Specifications

General

Audio Output	Stereo
Speaker Type	2-Way
Battery Life	Up to 24 hours
Power Source	AC adapter, Battery
Compatibility	iPod
Weight	340 g
Type	Docking Speaker
Frequency Response	80Hz - 20kHz

Related product manuals

Preview: Altec Lansing inMotion IM9

Altec Lansing inMotion IM9

Preview: Altec Lansing inMotion iM7

Altec Lansing inMotion iM7

Preview: Altec Lansing inMotion IM5

Altec Lansing inMotion IM5

Preview: Altec Lansing inMotion IM500

Altec Lansing inMotion IM500

Preview: Altec Lansing INMOTION

Altec Lansing INMOTION

Preview: Moondance HOME M302

Moondance HOME M302

Preview: Altec Lansing MIX

Altec Lansing MIX

Preview: Altec Lansing XM3020

Altec Lansing XM3020

Preview: Altec Lansing M302

Altec Lansing M302

Preview: Altec Lansing M604

Altec Lansing M604