Altec TTP-343E Plus - Getting Started with Your Altec Printer; Unpacking and Inspecting the Printer; Altec Printer Equipment Checklist

2
2. Getting Started
2.1 Unpacking and Inspection
This printer has been specially packaged to withstand damage during shipping. Please
carefully inspect the packaging and printer upon receiving the bar code printer. Please
retain the packaging materials in case you need to reship the printer.
2.2 Equipment Checklist
 Printer
 Altec driver CD with NiceLabel SE
 Quick start guide
 USB port cable
 External universal switching power supply
 Power Cord
 Label Spindle, fixing tab x2, 1.5” core adapter
x2
 Ribbon spindle x2
 Ribbon rewind spindle paper core
If any parts are missing, please contact the Customer Service Department of your
purchased reseller or distributor.
Dealer option
 Peel off module assembly
Support paper: Art paper (Plain paper)
Support label length: 1”~6”
Support speed: 2~3 ips
 Guillotine cutter
Full cut:
Paper thickness: 0.06~ 0.19mm, 500,000 cuts
Paper thickness: 0.19mm 200,000 cuts
ALTEC industrial identification
altec.nl | altec.be