Altech BT300i User Manual

V1 JUIN 2010 ALTECH Generation ALL IN ONE Type Heat Pump Water Heater Technical Manual
28
2.1.2 After powered on, the display lights up. Users can operate the unit through the buttons under the
display for different modes. Emptying: If the unit needs cleaning, moving etc, the tank should be
emptied. Method: See Figure 2.1.2
Close
Open
Drainpipe
Open
Cool water inlet
Hot water outlet
Close the cool water inlet, open the hot
drainpipe.
water outlet and open the nut of
After emptying, please close the nut
of drainpipe
Close
Drainpipe
Empt yi ng
NOTE: The outlet water temp. may be very high when emptying, beware of your body for burns.
2.2 Operation
2.2.1 Control Panel Explanation
Display
Operation
HYBRID MODE
OUTLET TEMP
ECONOMY MODE
HIGH TEMP
FILL WATER
ALARM
LOCK
TIME OFF
TIME ON
TIMER
CONFLICT
TEMP-SET
E-HEATER MODE

Altech BT300i Specifications

General

Brand	Altech
Model	BT300i
Category	Water Heater
Language	English