To Next PageTo Next Page
Need help?Do you have a question about the Altech CPA and is the answer not in the manual?
General| Voltage | 220-240V |
|---|---|
| Inlet/Outlet Size | 1 inch |
| Type | Centrifugal |
| Frequency | 50 Hz |
| Material | Stainless Steel |
Read through instructions before installation to prevent injury and damage.
Defines DANGER, WARNING, CAUTION, and NOTE symbols for safety.
Specifies that only qualified personnel may install and operate the pump.
Lists regulations to be observed during installation, including VDE and local rules.
Warns against unauthorized modifications and the use of non-original spare parts.
Provides guidelines for unpacking, checking, and storing the pump safely.
Details safety precautions for working with electrical current and pump protection.
Lists technical specifications such as voltage, temperature class, IP rating, and dimensions.
Details the items included in the pump package, such as pump, insulation shell, and seals.
Defines the pump's purpose for heating systems and approved fluids like water/glycol mixtures.
Explains the pump's components: hydraulic system, motor, and electronic control module.
Describes how to set functions using the operating knob and LED display.
Covers safety precautions and site selection for pump installation.
Instructions on how to rotate the motor housing for correct installation positioning.
Details the safe connection of the pump to the electrical supply by a qualified electrician.
Explains how to operate the pump using the control knob.
Describes the process of filling the system and automatic bleeding of the pump.
Details how to select control modes and set delivery head or speed stages.
Guides on adjusting the pump speed or delivery head using the knob and display.
Provides a table of common faults, their causes, and remedies.
Lists error codes, fault descriptions, causes, and recommended remedies.
