Need help?Do you have a question about the Altera Max II and is the answer not in the manual?
General| Typical fMAX | 300 MHz |
|---|---|
| Device Category | Complex Programmable Logic Device (CPLD) |
| Logic Elements (LEs) | 240 to 2210 |
| Supply Voltage | 1.8V, 2.5V, 3.3V |
| Operating Temperature | Industrial |
| User Flash Memory | 8 Kbits |
| Operating Temperature Range | 0°C to +85°C (Commercial), -40°C to +100°C (Industrial) |
| Package Options | TQFP, BGA |
Details on document revisions and updates.
Provides contact information for technical support and Altera.
Explains typographical conventions used in the document for clarity.
Lists the components and capabilities of the MAX II Development Kit.
Outlines the necessary hardware and software for the kit.
Lists the items included in the MAX II Development Kit package.
Instructions for inspecting the development board for damage.
Lists essential software needed before developing designs for the kit.
Key information regarding licensing and software installation.
Steps for installing the Quartus II development software.
Details the minimum system requirements for Quartus II software.
Guide to requesting and installing license files for Quartus II.
Instructions for connecting the board to power and a PC.
Information on using the ByteBlaster II cable for programming.
Steps to program the MAX II device on the development board.
Details on preparing the development board for programming.
Steps to configure Quartus II for device programming.
Guide to running the functional test on the development board.
Explores Power-Up, Low Power, and Real-Time ISP demos for device features.
Covers USB, Slot Game, and PCI reference designs for system interfacing.
To Next Page
