Altera MAX 10 series - User Manual

MAX 10 Power Management User Guide
Subscribe
Send Feedback
UG-M10PWR
2015.11.02
101 Innovation Drive
San Jose, CA 95134
www.altera.com

Summary

MAX 10 Power Management Overview

MAX 10 Power Management Features and Architecture

Power Supply Device Options

Discusses the different power supply configurations available for MAX 10 devices.

Power Supply Design

Transient Current

Describes transient current observed on the VCCIO power supply during MAX 10 device power-up.

Power-On Reset Circuitry

Power Supplies Monitored and Not Monitored by the POR Circuitry

Instant-On Support

Instant-On Requirement

Details the power-up sequence and ramp time requirements for the instant-on feature.

Power Management Controller Scheme

Power Management Controller Architecture

Internal Oscillator

I;O Buffer Power Down

Global Clock Gating

Hot Socketing

Hot-Socketing Specifications

Lists advantages and compliance of hot-socketing support in MAX 10 devices.

Hot-Socketing Feature Implementation

Drive MAX 10 Devices Before Power Up

Explains driving devices before power up and I/O pin tri-stating during power up.

Power Management Controller Reference Design

Power Management Controller Block Diagram

Shows the block diagram of the reference design for the power management controller.

Input and Output Ports of the Power Management Controller Reference Design

Defines the input and output ports used in the PMC reference design.

Additional Information for MAX 10 Power Management User Guide

Altera MAX 10 series Specifications

General

Brand	Altera
Model	MAX 10 series
Category	Microcontrollers
Language	English