What does 'Probe 1 short' mean on Alto-Shaam 1200-SK Oven?
If the Alto-Shaam oven displays a 'Probe 1 short' error, it signifies a short circuit detected on the sensor wires. Check: 1. Sensor connection circuit, upper 2. Sensor compartment 3. Control Board
What does 'Bootloader EEPROM RAM reset' mean on Alto-Shaam 1200-SK Oven?
If your Alto-Shaam Oven displays a 'Bootloader EEPROM RAM reset' error, it indicates a bootloader chip error. A power cycle is required to reset the system.
What to do if Alto-Shaam Oven shows over-voltage error?
If your Alto-Shaam oven displays an over-voltage error, it means the supply voltage is incorrect. You should correct the supply voltage to resolve this issue.
How to resolve 'No such file on USB' error on Alto-Shaam 1200-SK Oven?
If the Alto-Shaam Oven displays a 'No such file on USB' error, it means the required file is missing from the USB drive. Load the correct file onto the USB.
What causes 'Probe 1 open' error on Alto-Shaam 1200-SK Oven?
If the Alto-Shaam oven displays a 'Probe 1 open' error, it means an open circuit has been detected on the sensor wires. Check: 1. Sensor connection circuit, lower 2. Sensor compartment 3. Control Board
What to do if the Alto-Shaam 1200-SK Oven door is open?
If the Alto-Shaam Oven door is open, close it and check the door switch operation.
What to do if my Alto-Shaam 1200-SK Oven displays 'Check fans' error?
If the Alto-Shaam oven displays a 'Check fans' error, it indicates insufficient internal cooling airflow. The possible causes are: 1. Cooling fan filters dirty 2. Cooling fans not operating 3. Installation clearance requirements not met
What causes the 'Over-voltage' error on my Alto-Shaam 1200-SK, and how to fix it?
If your Alto-Shaam oven displays an 'Over-voltage' error, it means the supply voltage is incorrect. Correct the supply voltage to resolve this issue.
How to fix error E-10 on Alto-Shaam 1200-SK Oven?
To resolve error E-10 on your Alto-Shaam oven, which indicates a short circuit detected on sensor wires, check the following, in order: 1. Sensor connection 2. Sensor 3. Control Board
What to do for Probe 1 short circuit in Alto-Shaam Oven upper compartment?
If your Alto-Shaam oven displays a 'Probe 1 short circuit, upper compartment' error, it means a short circuit has been detected on the sensor wires. Check the sensor connection circuit in the upper compartment, the sensor compartment itself, and the control board.
General| Brand | Alto-Shaam |
|---|---|
| Model | 1200-SK |
| Category | Oven |
| Language | English |
To Next Page
