Alto-Shaam Vector H Series - Connect power

INSTALLATION
Combitherm® CT PROformance™ Series ? Operator’s Manual ? MN-35948 ? Rev 0 ? 3/17
12
Continued from previous page
Connect power
To connect electric power to the oven do the following.
Step Action
8. Set the main disconnect switch a to the OFF position.
9. Set the standby switch b to the OFF position.
10. Connect the plug to the outlet.
Result The oven is now installed and ready to be turned on.
VMC-TS-000137
1
VMC-TS-000076
b
NEMA 15-50PNEMA 6-50P NEMA 6-30P
VMC-TS-000318
https://appliancetechmanuals.com