Alto-Shaam Vector VMC-H2 Service Manual

TROUBLESHOOTING
Vector™ H Seri es ▪ Serv ic e M anua l ▪ MN- 4654 4 ▪ Re v 01 ▪ 1 1/19
66
Continued from previous page
3. Enter the pass code 6702 c.
Touch the check mark d. The general device information screen displays.
4. Scroll e to the chamber selection buttons.
5. Touch the button f of the chamber to be tested. The chamber options are
displayed.
6. Scroll g until the heater button and the convection fan button are displayed.
Continued on next page
VMC-TS-008131
c
d
VMC-TS-008133
e
VMC-TS-008176
f
VMC-TS-008178
g

Alto-Shaam Vector VMC-H2 Specifications

General

Brand	Alto-Shaam
Model	Vector VMC-H2
Category	Oven
Language	English