EasyManua.ls Logo

Alto-Shaam Vector VMC-H3H

Alto-Shaam Vector VMC-H3H
138 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MAINTENANCE
Ve ct or H Se ries S ervice Ma nual MN -4 654 4 Rev 0 1 11/19
45
Continued from previous page
Weekly cleaning
procedure
To clean the oven weekly, do the following.
Step Action
1. Set the main disconnect switch a to the OFF position.
Make sure the oven is cool—chambers are less than 140°F (60°C).
2. Spray the exterior areas of the oven with stainless steel polish.
3. Wipe the exterior areas of the oven with a non-abrasive nylon scrub pad.
4. Spray the interior areas of the oven with oven cleaner. Let the cleaner work
for 3–5 minutes.
5. Wipe the interior of the oven with a non-abrasive nylon scrub pad.
6. Clean each side of the window pane with an all-purpose cleaner.
7. Set the main disconnect switch a to the ON position when complete.
Continued on next page
NOTICE
Use only non-caustic cleaners.
Do not spray directly into the fan openings on the
rear of the oven.
Do not use cleaners that contain sodium hydroxide
(lye) or phosphorus.
VMC-TS-006236

Table of Contents

Other manuals for Alto-Shaam Vector VMC-H3H

Related product manuals